Renovation of a residential development in Pawtucket, Rhode Island. Completed plans call for the renovation of a residential development.

Each sealed bid needs to be marked on the outside of the envelope "Pawtucket Housing Authority, Galego Court Unit Venting Fans Project". This project is subject to prevailing wage rates. Minority and women owned businesses are encouraged to submit bids. The Pawtucket Housing Authority, Galego Court Unit Venting Fans Project work encompassed under this Contract shall include, but not limited to, establishing a perimeter around specified work area, posting proper signage of possible hazards on site, filing for applicable State and Local permits, replacement of the existing bathroom lights with new light/fan unit, each including a new vent duct and vent, all as shown on the contract documents, and providing all materials, labor, tools and incidentals necessary to complete the work of this contract to the satisfaction of the Owner. Location- 483 Weeden Street, Pawtucket, Rl 02860 All questions shall be submitted in writing via email to Roy Messier, Senior Project Engineer ofVerdantas, LLC, 401-728-6860. email: rmessierfdwerdantas.com by March 1, 2023 at 3:00 PM. Upon receipt of any written questions, an addendum will be issued to all bidders on March 6, 2023. The Pawtucket Housing Authority Galego Court Unit Venting Fans project consists of removing and replacing the existing bathroom light unit with a NuTone ARN110LKVV, or approved equal, with new 4" diameter flexible aluminum vent duct in eight (8) first floor units to new wall vents and twenty-two (22) second floor unitsto new soffit vents, located at the subject property, 483 Weeden Street, Pawtucket, RI. The work encompassed by this contract shall include, but is not limited to the following: 1.Coordinating with the Housing Authority for accessibility to specified buildings and proper staging areas; 2. Mobilization of al l applicable equipment staged within the agreed upon location; 3. Coordination and submittals ofall required shop drawingsto the Engineer for approval; 4. Obtain all required State and Local permits; 5. Complete in-field measurements to verify prior to purchasing applicable materials; 6. Removal and disposal of existing light units; 7. Install new NuTone ARN110LKW, or approved equal, with new 4" diameter flexible aluminum vent duct; a. First floor units will be vented to a new wall vent; b. Second floor units will be vented to a new soffit vent; 8. Demobilize from the site following final inspection by the Owner's Representative.