Renovation of a military facility in Hill Air Force Base, Utah. Working plans call for the renovation of a military facility.

Renovation of the plating processes facilities at Hill Air Force Base, including repair and renovation of existing facilities at Building 505 and Building 507. Work includes modernizing the plating process in Building 505 for Electroless Nickel, Cadmium Plating, Chrome and HVOF Strip, Chrome Plating, Anodize/Alodine, Zinc Nickel Plating, Nickel Sulfamate Plating, Phosphate, Temper Etch, Passivate Aluminum Conversion Coat, and Titanium Pickle. The shop area will be refurbished and brought in line with current process needs, environmental controls, interior electrical code requirements, and OSHA requirements. The oven area for the plating line in Building 505 will be reconstructed. The Type II anodize lines in Building 505 will be relocated to an existing plating area in Building 507. Government furnished equipment will be installed with necessary support equipment. New tanks will be reinforced with structural supports to meet updated codes for vertical and horizontal forces. The project will be accomplished in four phases to enable operations during construction, with different areas isolated for separate repairs. The contractor shall provide all labor, equipment, transportation, material, and supervision to perform the design and construction of the plating processes facilities, with a performance period of approximately 1,085 calendar days after notice to proceed. Location: Hill Air Force Base 5887 Wardleigh Rd, Hill AFB, UT 84056 The Method of Contractor Selection has not been determined at this Time. *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document.