Site work and paving for a road / highway in Madison, Wisconsin. Completed plans call for site work for a road / highway; and for paving for a road / highway.

Vendor Question Submission Deadline: March 10, 2023, 2:00pm The special provisions in this proposal shall supplement and take precedence over the Standard Specifications. A. Description: In most cases, milling will involve at least one vertical "butt" joint in order to match existing pavement. Should topographic or other physical constraints prevent a milling machine from making a satisfactory straight line, vertical "butt" joint, the contractor shall provide all labor and equipment necessary to complete the joint by other means. B. Construction Method: When adjacent to an existing concrete gutter, the contractor shall "wedge" cut the existing pavement surface to a width as specified by the County. The depth of the "wedge" cut shall be a minimum of 1 1/2 inches adjacent to the gutter and 1/8 inch on the outside edge towards the street centerline. The depth of cut shall be measured to the top of the ridges. C. Method of Measurement: Milling shall be measured by the square yard of pavement surface ground. Widths of grinding greater than designated by the County shall be at the contractor's expense. D. Basis of Payment: Milling will be paid for at the contract unit price bid for grinding, and shall be full compensation for grinding the existing pavement surface, constructing vertical butt joints, for wedging utility castings after grinding, for street cleaning, and for all equipment, tools, labor, and incidentals necessary to complete the work in accordance with this contract. A. Description: Materials covered under this provision shall conform to the State of Wisconsin, Department of Transportation's specifications for each "Type" mix.