This is a service / maintenance or supply contract in Castle Rock, Colorado. Contact the soliciting agency for additional information.

All RFP responses must list each piece of equipment identified in the Scope of Services shown above including suggestions on ideas for a basic and easy-to-use strength circuit equipment appropriate for an area approximately 29 feet by 15 feet. Also, please provide a unit cost for each piece of new equipment and trade-in value for existing equipment. The Town of Castle Rock intends to replace the existing line of cardiovascular equipment in the recreation center which includes: Weight MachinesBrandSerial #Date Delivered Seated Leg PressLife FitnessSS-SLP07140208/1/2014 Chest PressLife FitnessSS-CP0714020 8/1/2014 Leg ExtensionLife FitnessSS-LE08140058/1/2014 Seated Leg CurlLife FitnessSS-SLC08140028/1/2014 Row Life FitnessSS-RW07140208/1/2014 PulldownLife FitnessSS-PD07140188/1/2014 Pec Fly/Rear DeltLife FitnessSS-FLY07140118/1/2014 Biceps CurlLife FitnessSS-BC07140168/1/2014 Triceps PressLife FitnessSS-TP07140148/1/2014 Shoulder PressLife FitnessSS- SP07140168/1/2014 Abdominal Life FitnessSS-AB08140018/1/2014 Hip Ab/AdductorLife FitnessASHAA-0104-1038/1/2014 CMDAPLife FitnessCMDAP07141678/1/2014 CMDAPLife FitnessCMDAP07141418/1/2014 The Town of Castle Rock is interested in replacing this equipment with new and improved models of similar equipment that targets the same muscle groups. The above items must be included in the bid. However, muscle groups can be combined into one machine if applicable. The Parks and Recreation Department is also open to suggestions with regard to use of space and equipment organization. Additionally, the Town of Castle Rock is interested in potential ideas/suggestions for a basic and easy-to-use strength circuit equipment appropriate for an area approximately 29 feet by 15 feet. For the equipment listed in the chart above: Weight shall be selected by using high quality selector pin that penetrates the weight plate The pin shall be attached to the weight stack with a lanyard so the pin stays with the appropriate machine All weights shall be selected while the user is in position on/in the machine to allow resistance adjustment from the exercise position Each plate shall be marked with total weight Weight stack shall have bumpers under the weight stacks to reduce shock and vibration stresses to the frame and facility All weight stacks shall be guarded to prevent bystanders from inadvertent contact with the weight stack during use