Site work and paving for a road / highway in Washington, Utah. Completed plans call for site work for a road / highway; and for paving for a road / highway.

The purpose of this section is to clarify certain aspects of the Project and the Contract that must be taken into consideration and completed before final acceptance of the Work can be given. These items include cleanup, demonstration of acceptable performance of equipment and facilities furnished and installed, submittals, payment for all work completed, issuance of final acceptance documentation, accepted repair and restoration of work and materials found defective during the warranty period. Specific instructions are provided herein for completion of the Work in such a manner that it will be fully acceptable and that the CONTRACTOR will be eligible for receipt of final payment. This section covers procedures to be followed by the CONTRACTOR when providing information to the OWNER to obtain approval of materials, equipment, procedures, etc. described in the Specifications and Drawings. The work to be performed under this project shall consist of furnishing all labor, materials and equipment required to construct the facilities and features called for by the CONTRACT DOCUMENTS and as shown on the DRAWINGS. Complete sets of Bidding Documents may be obtained from the OWNER as designated in the Advertisement or Invitation to Bid. Complete sets of Bidding Documents, which include the following 3 documents: 1-Contract Documents and Special Provisions, 2-Standard Specifications for Construction, and 3-Drawings shall be used for preparing BIDS. The OWNER assumes no responsibility for errors or misinterpretations resulting from the use of incomplete sets of Bidding Documents.