Renovation of a municipal facility in Carthage, North Carolina. Completed plans call for the renovation of a municipal facility.

All inquiries for information concerning the Bid shall be directed to:Terra Vuncannon, Purchasing Manager206 South Ray StreetCarthage, NC 28327(910) 947-7118tvuncannon@moorecountync.gov All written questions shall be received by the Issuing Department no later than 10:00 am Thursday, March 23, 2023. The County of Moore reserves the right to cancel and terminate any resulting contract, in whole or in part, without penalty, upon forty-five (45) days' notice to the Vendor(s). Any contract cancellation shall not relieve the Vendor(s) of the obligation to deliver any outstanding services issued prior to the effective date of the cancellation. Project Description The intent of this project is to replace the existing air-cooled chiller at the Moore County Court Facility with a chiller of similar type and performance. The current chiller was manufactured by Airstack. It is a three module multi-stack chiller, model number: ASP30A. The existing chiller was designed with 88.2 tons of capacity, 211 GPM ,54 EWT/ 44 LWT with a 6.3 foot of head drop across the evaporator. The basis of design for the replacement is a new chiller by Airstack with 3 modules to match the existing footprint and performance as closely as possible. The basis of design for the replacement chiller has a performance of 211 GPM, 53.3/44 with a 9.07 foot of head drop across the evaporator. The proposed chiller shall have a 1.18k kW/ton (95 DB ambient temp) efficiency at full load and a 0.8162 kW/ton efficiency at 50% (65 DB ambient temp) capacity. The existing electrical feeder is 460V/3 phase with a 225-amp overcurrent device. New chiller shall have a 120V 20-amp circuit for freeze protection. Contractor shall verify the Freeze Protection circuit is on existing chiller and provide a new circuit as necessary. Approved equals are by Smardt and MotiveAir. Chiller features: o Multiple, independent refrigeration systems o Chiller Waterside Maximum Working Pressure is 150 PSIG o Stainless Steel Evaporator o Lead Compressor Sequencing (24hrs) o Automatic Internal Rescheduling If Fault Occurs o Automatic Logging of Any Fault Condition o Electronic Chilled Water Control o Quick Interconnect Modular Design o Designed For Quiet Operation(Alternate #4) o Filters In Evaporator Supply Headers (Alternate #3) o Stainless Steel Inlet Header o R-410A Refrigerant & POE Oil o 5kA SCCR o Static Option - .00" ESP (2 HP) STANDARD o Electrical Connection Type - Junction Box o Warranty: Compressor (5 Year) o Warranty: All Parts (1 Year) o Warranty: Labor Only (1 Year) o Warranty: Refrigerant (1 Year) o FRM Chiller (includes PPM & FS per module) o 3/4" Closed Cell Foam Insulation o Heat Tracing (requires separate 120V 20-amp electrical circuit) o Al/Cu Condenser Coils o Main Power Door Interlock Disconnect Switch o Independent Refrigerant Circuits o Single Point Power Connection o VFD's on Condenser Fans o Brazed Plate Evaporator o 2 Condenser Fans per module o External Master Controller Box Evap Flow Switch-Thermal Dispersion Type (24 Volt Factory Powered & Installed on Each Module)