Site work and paving for a road / highway in Litchfield, Connecticut. Completed plans call for site work for a road / highway; and for paving for a road / highway.

The Town of Litchfield is accepting bids for Bituminous Concrete Truck & Installation, Milling and Restoration Services. All bids must be submitted on forms and in accordance with specifications supplied by the Litchfield Public Works Department. The Town of Litchfield reserves the right to waive the technical defects in the bids, toreject any bid which does not conform to the terms and conditions described in the bid documents, to accept or reject any part of any bid and to reject all bids and again invite bids. No bidder may withdraw a bid within 60 days after the bid opening. EOE-AA Any questions pertaining to the scope of the work or content or procedure for submitting proposals should be in writing and directed to Raz Alexe, Director of Public Works by e-mail to be received no later than March 23, 2023, by 3:30 p.m Milling Contractor shall be awarded a price for each type of equipment relocated from one (1) work area to the next work area when groups are used to form one (1) purchase order. Equipment relocation types are defined as: "Movements": To transport equipment from one (1) work area to another by truck. "Relocation": To relocate equipment from one (1) work area to another using its own power. "Skip": To skip from one (1) work are to another using its own power. A Contractor shall be paid for each Movement, Relocation, or Skip (MRS) based on the ranges below: Example: Contract for MRS's will be required for two (2) distinct ranges: DISTANCE PRICE Under 500' $No Payment 501' to 2640' $50.00 2641' to 5280' $75.00 For each additional mile, add $25.00 Note: All distances shall be measured from the closest work location. Milling of Hot Mix Asphalt - ( 0 to 3 inches) Milling of Hot Mix Asphalt - ( 3 to 6 inches) Milling of Hot Mix Asphalt - (Greater than 6 inches) Milling Services consist of the cutting and removal of bituminous concrete material from roads, including all necessary work to establish the lines and grades specified and the removal and clean up of all milling material around catch basin inlets, manholes, utility valve boxes, and any similar structures. Contractors shall delivery all milling material to a designated site as determined by the Director or representative unless other arrangements have been made for the removal of milling material. A milling crew shall include a minimum of one (1) milling machine (minimum 6 foot cutting width), all extra teeth and tools needed to perform repairs, a mounted pickup conveyor, operator and grounds person. Take-away trucks with operators, a pick-up broom with operator, water tanker (with water supplied by the Contractor), air compressor (minimum 125 CFM) with operator, a small milling machine with operator capable of removal and clean up of all milling material around grates, manhole covers and other apparatus on roads. Equipment or milling bituminous concrete shall have a minimum cutting width of 6 feet. It shall be self propelled with sufficient power, traction, and stability to maintain the required depts. And slope and shall be capable of removing the existing bituminous concrete to the line, grade and typical cross-section specified by the Director or his designee.