Renovation of an educational facility in Florence, South Carolina. Completed plans call for the renovation of a educational facility.

The existing washer and dryer are in disrepair and in need of replacement. The University seeks to obtain one industrial quality washer and one industrial quality dryer that meet the specifications described herein. Scope of Work Background Information: The existing washer and dryer are in disrepair and in need of replacement. The University seeks to obtain one industrial quality washer and one industrial quality dryer that meet the specifications described herein. Specifications: Washing Machine Specifications - Item 1 The University seeks to procure one (1) industrial quality washing machine of equal or better quality than a Speed Queen SCT040 Washing Machine. Brand name description is intended only to describe the minimum specifications required to satisfy the University's washer needs, not to limit quotations to this particular brand name. Washing Machine must meet the following specifications: 200-240 Volt 1-3 phase Minimum 40 lb. capacity Minimum cylinder volume of 6.3 cubic feet Hard Mount 6" bases for hard mounting Front Load Minimum 200 G force rating Machine must NOT be coin operated. Washing Machine proposed must include a minimum three (3) year all parts warranty The University is not accepting quotations for a residential/commercial quality washer. A quote for a residential/commercial washer may be considered non-responsible and therefore the quote would not qualify as a valid quote for consideration by the University. **Offeror must provide specification sheet for the washer being proposed in your quotation. Dryer Specifications - Item 2 The University seeks to procure one (1) industrial quality dryer of equal or better quality than a Speed Queen ST055 Dryer. Brand name description is intended only to describe the minimum specifications required to satisfy the University's dryer needs, not to limit quotations to this particular brand name. Dryer must meet the following specifications: 200-240 Volt 1-3 phase Gas powered Minimum 40 lb. capacity Minimum cylinder volume of 17 cubic feet Reversing Drum Vented Tumble Dry o Vent must capably exhaust a minimum of twenty (20) feet. Minimum Btu/hour 100,000. Hard Mount Page 4 6" bases for hard mounting Front Load Machine must NOT be coin operated. Dryer proposed must include a minimum three (3) year all parts warranty The University is not accepting quotations for a residential/commercial quality dryer. A quote for a residential/commercial dryer may be considered non-responsible and therefore the quote would not qualify as a valid quote for consideration by the University. **Offeror must provide specification sheet for the dryer being proposed in your quotation. Installation of washing machine and dryer - Item #3 - o Installation includes but is not limited to: o Washing Machine: Deliver and place machine in proper location at the Physical Plant/Campus Safety building as directed by University Liaison Connect electric cord to jack. Connect water source with provided washing machine Maintain machine to working order Hard mount the machine to the location as directed by the University liaison Troubleshoot the machine to ensure working order before leaving the site If machine is not working at conclusion of installation, installer must coordinate an immediate return trip with the University Liaison at no cost to the University. o Dryer: Deliver and place machine in place on location at the Physical Plant/Campus Safety building as directed by University Liaison. Connect natural gas source to the provided dryer. Connect ventilation source with provided dryer machine Maintain machine to working order. Hard mount the machine to the location provided by the University liaison Troubleshoot the machine to ensure working order If machine(s) is not working at conclusion of installation, installer must coordinate an immediate return trip with the University Liaison at no cost to the University. Installation of washing machine and dryer must include a minimum 90 day labor warranty.