GENERAL SPECIFICATIONS
The following specifications are intended to serve as general guidelines to obtain bids on comparable
equipment. It is the intent of these specifications to describe a unit that we feel best meets our
requirements. These specifications are to be considered minimum specifications unless stated
otherwise. All necessary equipment and shall be furnished and delivered complete and ready for
immediate use. The bid information shall itemize in detail all standard and accessory equipment. The
equipment shall be equal to or exceed the following specifications, and shall conform to all safety and
OSHA regulations. All parts not specifically mentioned which are necessary to provide a complete
operating piece of equipment shall be included in the bid and shall conform in strength, quality of
material, and workmanship to what is usually provided by the manufacturer and generally accepted by
industry. The supplier shall describe in detail those areas where their equipment does not comply with these
specifications. Any alternate equipment or material deviating from the specifications must be noted
with the bid proposal. Deviations may or may not be considered informalities in bidding. Deviations
that may or may not be accepted by the City shall also be described in detail. Failure to do so may
result in disqualification of the bid. The term "standard" is defined as that equipment listed or shown as standard equipment at no extra
cost in the manufacturer's current publications. The City of Antigo reserves the sole discretion in determining the best and most qualified bid. The
decision to purchase will be based on price, performance, maintenance history, availability of parts and
service, equipment warranty (if any), evaluation of quality, past operating experience and delivery date.
The City of Antigo reserves the right to reject any and all bids, and determine the choice of equipment
in the best interests of the City after considering those criteria mentioned in the preceding paragraph.
WARRANTY & RECALLS Warranty work or recalls must be fully explained at delivery. If warranty work or recall work needs to
be performed on unit successful bidder shall complete any work at bidder's cost. INTENT
It is the intent of these specifications to describe a unit, which will consist of the manufacturer's new
model. The equipment will include all necessary parts and shall be delivered new, and after installation
ready for immediate use. All parts not specifically mentioned but which are necessary for the complete
unit shall be supplied and installed by the vendor even though such work or materials are not
specifically outlined and shall conform in strength, quality of material and workmanship to the best
practice known to the industry
.webp)
