Renovation of an educational facility in Columbia, Missouri. Completed plans call for the renovation of a educational facility.

Moberly Area Community College, 101 College Avenue, Moberly, MO 65270 is accepting sealed bids to replace building and pylon signs at the Columbia Campus. MACC Building Sign Facing 1-70 (Sign #1) MACC Building Sign Facing Parkade Street (Sign #2 - on stone wall Pylon Signs (Signs #3-5 - three total): Makerspace Sign (Sign #6): MACC reserves the right to accept or reject any or all bids. The college is requesting sealed bids for new signage at the Columbia location. The scope of work includes: Removing (2) existing building signs Removing (3) existing pylon signs Installing (6) new signs; (5) to replace the current signs and (1) new location. Sign #1 o Remove existing channel/molded letters (Total estimated length is 71' with existing logo/MACC at 44" x 180"). o Once this is complete, MACC will hire an additional contractor to repair and paint EIFS prior to installation of new signage. o Sign contractor will provide detailed information to electrical contractor (hired by MACC) and coordinate \with them the installation of any new power requirements. o Patching/coating will be required to restore the building fascia before the new sign can be installed (contractor hired by MACC). o Install new building sign (pictured above, eps files provided upon request). o New building sign will use channel letters mounted on a raceway (painted finish to match the building face). The new logo and MACC are estimated at 72" x 275". The words: "the college for you," are to be designed using 2' channel letters (estimated size is 50.5" x 423"). o The new sign is to be 100% internally illuminated with standard white LED lighting powered by 60-watt LED power supply (100-240V). o Logo and letters should be 3/16" polycarbonate faces, 5" depth and are to utilize premium grade cast vinyl. All black lettering is to utilize 3/16" white polycarbonate faces with black dual perforated highperformance vinyl applied faces. Sign #2 o Remove existing molded logo/letters (Estimated size is 44" x 180"). o Install new building sign (Estimated size is 50" x 135"). o The new sign must be sized proportionately for the available space. Use the eps file provided for sign #1 and downsize as necessary. o New sign will use molded letters and will not require any power source. New Pylon Signs (ft's 3,4, and 5) o Remove existing channel letter signs o New pylon signs will use the new college logo in the format pictured above. o Each new sign is estimated to be 40" x 116". New signs will utilize existing power supply. o New signs should be constructed using 6" extruded aluminum frame backlit sign cabinet. Complete with 3/16" polycarbonate front panel insert and 0.040 aluminum back panel plate. The entire sign cabinet is to be painted black as per logo specifications. o Each sign will utilize decorative aluminum endcaps (silver in color/appearance). Endcaps must be sized proportionately to match the neighboring pylon sign (pictured near ft's 3 & 4 above) but are not required to be the exact same curved profile as the neighboring sign. Present the best profile options for selection. Each sign is to use internal standard white LED lighting powered by 60-watt LED power supply (100-240V). o The logo/letters should be designed using the full color logo for dark backgrounds (eps file provided upon request). New Pylon Sign #6 o New custom shaped cabinet sign will use the MACCLAB logo. Logo (eps file) will be provided upon request. o Sign contractor will provide detailed information to electrical contractor (hired by MACC) and coordinate with them the installation of any new power requirements. o Sign is estimated to be 54" x 60". o New sign should be constructed using 5" aluminum frame with 2" black trim cap. o White LED lighting powered by 60-watt LED power supply (100-240V).