Renovation of an educational facility in Chicago, Illinois. Completed plans call for the renovation of a educational facility.

Questions Due Date: Mar 16th 2023, 2:30 PM CDT Chiller refrigerant to be R22 Provide Labor and Materials: To replace Chiller and RTU Compressors 1) Chiller Reclaim any refrigerant in the circuit with the bad compressor. Remove the bad compressor. Provide and install a new 60 ton compressor and compressor contactor. Replace all drier cores. Pull a vacuum and charge circuit with refrigerant. Test for proper operation. 2) Office RTU Reclaim any refrigerant from the unit. Cut out and remove the bad compressor. Provide and install a new compressor, contactor and drier. Pull a vacuum and charge with freon. Test unit for proper operation. 3) Contractor to secure necessary permits. 4) Contractor to field verify dimensions and specifics of all projects listed above before placing bid. 5) Not responsible for contractor errors as a result of non-field verification. 6) Materials and installation must comply with CPS Standards and Specifications as 7) Secure job site overnight if work is not completed in one day. 8) If building or CPS properties are damaged during construction, contractor to replace and/or repair as necessary. 9) Provide necessary labor and materials to fix/correct issues preventing any or all of the projects to be marked as completed. 10)All work shall be coordinated with the Board authorized representatives to complete in an agreed upon time frame. 11)Contractor is to remove and dispose of materials torn out and any construction debris. 12)All trash must be removed off-site by contractor. 13)Clean the surrounding area and make sure all is swept of debris. 14)All questions/requests must be received two (2) business days prior to bid closing.