Site work and new construction of a warehouse / distribution facility in San Clemente, California. Conceptual plans call for the construction of a 1,925-square-foot warehouse / distribution facility; and for site work for a warehouse / distribution facility.

Construct a 1,925 SF prefabricated metal warehouse building at the Joint Regional Water Supply System Bradt Reservoir Site within the City of San Clemente. Project includes approximately 500-ft extension of 480 VAC power and communication wire from the site s Chlorination building to the warehouse location. Electrical improvements also require necessary conduits, cabinets, panel, various fasteners, transformer conversion to 220 and 110 VAC, various 220 and 110 outlets, interior lighting, and exterior lighting. The Furnishing to Said District of All Transportation, Labor, Materials, Tools, Equipment, Services, Permits, Utilities, and Other Items Necessary to Construct Said Work. Accordingly, the Contractor shall possess a valid Class [A] license at the time that Contractor submits its Bid. Bid Bond 10.00% Payment Bond 100.00% Performance Bond 100.00% License Requirements Contractor's License A Project Duration175 Working Days Online Q&A Yes Q&A Deadline 05/25/2023 at 5:00 PM (PDT) Questions and requests for substitution pertaining to this project must be submitted to the District electronically via the Planet Bids electronic bidding system Work includes furnishing products, labor, tools, transportation, and services to: 1. Protect existing facilities in place. 2. Maintain water service and pressure to water system throughout construction. 3. No demolition work shall proceed prior to receipt of confirmation of delivery dates from Manufacturers of manufactured items having >30 days lead time. 4. Demolish existing pavement and electrical improvements. 5. Modify existing facilities as required to facilitate interface and connection to new improvements. 6. Construct new electrical infrastructure, including conduits, wiring, grounding, and junction box. 7. Construct sitework, including grading, concrete foundation and floor slab, paving, and miscellaneous site improvements 8. Construct prefabricated metal building. 9. Construct electrical improvements, including extending electrical power and panel to the building, interior and exterior lighting, electrical receptacles, motor operated overhead doors, and exhaust fans. 10. Regrade and pave site to restore paving and sitework to preconstruction condition and provide access to new building. C. The prefabricated building is to be constructed complete with operating engineered systems, including appurtenant structural, mechanical and/or electrical mountings fittings or connections required for 1. Compliance with Manufacturer's installation requirements, 2. Compliance with applicable building, fire, plumbing, mechanical, electrical, and energy codes and standards, and 3. As needed to permit systems to perform functions required by Contract Documents and described in Manufacturer's printed literature. D. Contractor's submission of bid shall constitute acknowledgment that, if awarded contract, they have relied upon and are relying upon their own examination of: 1. Contract Documents 2. Available geotechnical information. 3. Work site 4. Access to Work site 5. Electrical service available at Work site. 6. Conditions under which Work is to be performed 7. Existing facilities on and near Work site. 8. Data and matters requisite to completion of Work The engineers estimate of most probable construction cost is in the range $400,000 - $500,000.