Site work and paving for a mixed-use development in Gunnison, Utah. Completed plans call for site work for a road / highway; for paving for a road / highway; sidewalk / parking lot; sidewalk / parking lot; and water / sewer project.

QUESTIONS DEADLINE Monday, May 1, 2023 3:00 PM Utah Public Procurement Place (U3P) This section of the specifications cover specific requirements, instructions, and conditions applicable to this project only, which are not covered by the General Conditions of the Construction Contract prepared by the Engineers Joint Contract Documents Committee. Should there be conflicting statements between this section and other sections of these specifications, this section shall govern. Should there be conflicting statements between the Standard General Conditions of the Construction Contract, these specifications or the Utah Division of Facilities Construction and Management (DFCM) Contracts Agreement. The order of precedence is as follows: 1. DFCM Contractors Agreement. 2. These Specifications 3. Standard General Conditions of the Construction Contract. Only Firms Pre-qualified During Stage I of the Rfs Are Allowed to Bid on This Project If you need more information on this event, please contact: Tim Christensen +1 385-226-2422 timchristensen@utah.gov Asphalt pavement is needed to provide a good driving surface behind the central plant, dock area, buildings and sheds. Demolition; Mobilization; 3-inch hma pg 58-28 (1/2"mix); sawcutting; remove asphalt; excavation; untreated base course; granular borrow; soft spot repair; remove concrete; 4-ft concrete waterway; 24-inch curb and gutter;10-inch concrete retaining wall; 4-inch concrete flatwork; 6-inch reinforced concrete flatwork; 4' x 4' drop inlet box; 3' x 4' drop inlet box; curb inlet box concrete steps; slotted drain; 12-inch csp culvert (polymeric coated);15-inch csp culvert (polymeric coated); 18-inch csp culvert (polymeric coated); 18-inch metal end section. *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document.