Renovation of a municipal facility in Yonkers, New York. Completed plans call for the renovation of a municipal facility.

1. Measure airflow and pressure drops across all components to ensure new compatibility with new components (pre and post construction) 2. Remove roll filter/mechanism, electrostatic filter modules, HEPA filter, piping/plumbing of existing wash system 3. Clean the entire ductwork and filter housing 4. Install new filter racks for three (3) stages of filters 5. Side access 3-stage filter housing a. Provide and install 12, 24x24x12 BIOMAX HEPA filters b. Provide and install 12, 24x24x6 MERV 13 Box filters c. Provide and install 12, 24x24x2 MERV 8 Pleated Pre-Filters 6. Install air filters and 4 duct access panels 7. Replace 7 return air grilles located on the range 8. Startup and debugging services 9. Check and adjust airflow/velocity at firing line 10. Containerize, haul and dispose lead contaminated debris/materials associated with the above scope of services and dispose approximately 36 HEPA filters presently adjacent to the exhaust system. Reference Number 0000319275 Question Acceptance Deadline 05/12/2023 02:00 PM EDT The City of Yonkers is seeking a vendor to provide the manpower, supplies and equipment to replace the interior of the existing indoor range exhaust filter system. Buyers Requirements General Requirements - Certified Payroll - FOB Destination - Installation Required - Insurance Required - License Required - Prevailing Wage Required Award Requirements - All or None Award Scope of services: Measure airflow and pressure drops across all components to ensure new compatibility with new components (pre and post construction) Remove roll filter/mechanism, electrostatic filter modules, HEPA filter, piping/plumbing of existing wash system Clean the entire ductwork and filter housing Install new filter racks for three (3) stages of filters Side access 3-stage filter housing Provide and install 12, 24"x24"x12" BIOMAX HEPA filters Provide and install 12, 24"x24"x6" MERV 13 Box filters Provide and install 12, 24"x24"x2" MERV 8 Pleated Pre-Filters Install air filters and 4 duct access panels Replace 7 return air grilles located on the range Startup and debugging services Check and adjust airflow/velocity at firing line Containerize, haul and dispose lead contaminated debris/materials associated with the above scope of services and dispose approximately 36 HEPA filters presently adjacent to the exhaust system. Prevailing wage: A New York State Department of Labor (NYSDOL) Prevailing Wage Rate Case Number has been assigned to this project. The PRC case number is # 2023005216. Contact Information Nicole Galdi 914-377-6068 nicole.galdi@yonkersny.gov