Demolition, site work, new construction and renovation of a municipal facility in Converse, Texas. Completed plans call for the demolition of a municipal facility; for the construction of a municipal facility; for site work for a municipal facility; and for the renovation of a municipal facility.

Cost Range: $300,000 - $800,000 The work shall consist of the renovation of the vacant portion of the City of Converse "Old City Hall Building" - entailing complete interior demolition/removal of: the old Police Holding Cells, toilet rooms, offices, workshop area, demo/removal of metal stud/gyp bd walls, plywood wall coverings, cmu walls (around Holding Cells), cut-away/removal of a portion of exterior stucco and metal stud wall, hollow metal doors/frames, exterior aluminum doors and windows and frames, cut-out and removal of exterior stone over wall at windows, vct flooring, acoustical tile ceilings/metal grid/hanger wire, concrete ceilings (over Holding Cells), above ceiling miscellaneous framing, hangers, wiring/comm cable; remove HVAC air handlers grill; remove electrical lights/receptacles and related conduit/wire /circuiting; remove plumbing fixtures and related supply lines. The renovation build-back will consist of a new open space activity area, new male and female lavatories, a new office, creation of an area for a future commercial kitchen with plumbing and electrical service at walls; toilet partitions, toilet rm accessories, lavatory counter-tops and cabinets, metal stud/gyp bd walls, acoustical tile and enhanced wood slat lay-in ceiling with a metal grid, wood, and hollow metal doors/frames and hardware, new electrical lights/power receptacles; new plumbing lines fixtures; new HVAC air handler units/ducts/grill, ceramic tile on lavatory floors/walls and vct flooring, new gyp bd and metal stud walls/painting/rubber wall base. Additional work will be considered under several add alternates consisting of: the elimination of several non-structural stucco pilasters at the Covered Walkway, enhancements to the building exterior by adding metal panel siding over existing exterior stone; site work adding seal coating and re-stripping of the parking lot and a metal picket fence enclosure, Fire Alarm System; and Audio/visual IT systems. Potential Bidders must confirm their intention of bidding with the Architect - Dillard Architect Group - PLLC (via mail - 708 Rigsby, San Antonio, Texas, 78210 or email at porter.dillard@dillardarchitectgrp.com or by phone - 210.241.7951) to enable receipt of all addendum or responses to questions." *The list of planholders and/or interested bidders is not being tracked by the stakeholders involved with this project. If you are an interested contractor and wish to be listed as a bidder, please notify our editorial staff at addtobidlist@constructconnect.com.