INTENT:
At Riverbanks Zoo and Gardens, we continue to make improvements at the facility for enhancing the
guest experience and animal welfare. This improvement will replace over seven hundred (700) feet of
metal hydraulic lines and replace them with either metal or flex (see attached photo's). These lines are
located within an animal holding area so extreme caution must be used for cleanliness. This will be a
"turnkey" project so this bid shall cover the furnishings of all labor, material, equipment, and any mark
ups.
SPECIAL PROVISIONS:
Contractor shall use and furnish at his own expense all labor, equipment, and materials necessary for the
satisfactory performance of the work set forth herein. After installation, all work areas shall be left in a
clean condition. A clean condition is defined as the absence of residue and materials in or around the
working area.
HOURS OF OPERATION:
Riverbanks Zoo and Garden is open Monday through Sunday from 9:00 am to 5:00 pm and closed on
Thanksgiving and Christmas Days.
COMPLAINTS:
Contractor shall, in person or by his agent, investigate any complaints which may concern or involve the
performance of this Agreement. Contractor shall report to the District on the day following receipt of the
complaint as to the action or procedure taken to cure the situation.
DISPOSAL OF MATERIALS:
Contractor shall dispose of all materials used. The Contractor will ensure proper handling and disposal of
materials removed from the work areas to prevent discharges of pollutants to surface waters or
groundwater.
REQUIREMENTS:
o Bidders shall refrain from direct or indirect communications promoting their qualifications for
this Project to the District or any member of the Lexington-Richland Riverbanks Park
Commission, other than through the formal submittal process established by this Invitation for
Bid (IFB). Failure to comply with submittal requirements may cause the submittal to be
removed from further consideration.
o The selected contractor must hold the required license(s) for this project (if required)
Question Deadline 05/16/2023 at 5:00 PM ET
.webp)
