Site work and paving for a road / highway in Salt Lake City, Utah. Completed plans call for site work for a road / highway; and for paving for a road / highway.

This project is to provide a CDL driving range with lighting, cameras and a pedestrian pathway. Sawcut existing asphalt. Remove existing asphalt pavement. Remove existing road base / subgrade to 11" below finish grades. Remove existing road base / subgrade to 16" below finish grades. Sawcut and remove existing curb and gutter. Sawcut and remove existing waterway. Remove and dispose of existing light pole, base and fixture. Pull wires back to nearest junction box. Remove and dispose of existing catch basins. Remove existing tree. Remove and dispose of existing landscaping and irrigation system as required. Cap existing irrigation lines as required or install in pipe sleeves beneath concrete items. Trim existing trees to have 16'-0" clearance. Trim existing tree roots. Blackout or otherwise remove existing parking stall striping. Remove and dispose of existing signs. Over excavate an additional 12" of soft subgrade and fill with pit-run material. Provide and install stabilization fabric. New storm drain catch basin. Sawcut top of existing catch basin to install concrete apron. Provide and install new curb & gutter. Provide and install new release curb & gutter. Provide and install new curb & gutter to match existing. Provide and install new concrete waterway. Provide and install 6"x6" concrete strip. Provide and install concrete sidewalk. Provide and install large concrete stair. Provide and install large concrete stair stainless steel handrail. Provide and install 6" wide curb wall. Install existing irrigation lines in sleeves beneath new concrete. Install 8" road base. Install 3" asphalt. Install 12" road base. Install 4" asphalt. Install 8" wide solid white pedestrian aisle lines. Install 4" wide parking stall striping. Provide and install temporary sign. New 4" dia. concrete filled pipe bollard. Convert existing sprinkler system valve to drip irrigation at existing trees. Provide and install clean fill beneath topsoil. Provide and install new topsoil. Provide and install rock mulch over weed barrier fabric. Provide and install sod. Modify, adjust, and repair existing irrigation system. Flush system and clean-out debris from existing and new storm drain catch basins. General Conditions. Project mobilization. Erosion control, sweep, and dust control. Construction survey and staking. Traffic control and pedestrian safety. Electrical Phase 1 and Phase 2. Existing light pole and base to be removed. Provide and install pull box. Provide and install 1" raceway. Provide and install 4" raceway, boring / trenching. Provide and install 4" raceway, trenching. Provide and install light pole base, pole, and head (H1). Provide and install double head (H2R). Provide and install single head (D1R). Provide and install single head (G1R). Provide and install single head (J1R). Provide and install outdoor camera with media conversion cabinet. All other electrical items. Question Submission Close Date 5/23/2023 3:00 PM MDT