Site work for a bridge / tunnel in Jefferson, Georgia. Completed plans call for site work for a bridge / tunnel.

The Contractor will be required to perform prep work, removal, installation and cleanup for Bridge Maintenance and Repair defined in this ITB. The majority of the work will occur on the Interstate and State Route system. The Contractor shall supply labor, equipment, tools, means of transportation, traffic control, and incidentals to perform work in accordance to specifications, and to ensure a safe work environment for employees and the traveling public within the time schedule specified. 1. Scope Work under this ITB consists of furnishing all labor, materials, tools, equipment, means of transportation, and incidentals necessary to perform the services. Contractor must furnish equipment in good operating condition and operated by properly trained and qualified personnel. The Contractor must make a good faith effort to furnish the Department the fully operational equipment needed to perform Bridge Maintenance and Repair at such time, and at such location(s) as directed by the Engineer. Prior to start of work, Contractor must inspect equipment to ensure the equipment is fully operational for the performance of its intended purpose. The Contractor will also be responsible for any traffic control, licenses, and permits required to satisfy the duties required herein. This solicitation is being conducted by the Georgia Department of Transportation under its authority to procure services ancillary to the construction and maintenance of a public road (as defined in O.C.G.A 32-1-3 (24) as provided for in O.C.G.A 32-2-61 (c) and (d) (1) (D). Only contractors deemed as Qualified Contractors to provide "Bridge Maintenance and Repair" through the routine maintenance prequalification process are eligible to participate in this Invitation to Bid/Request for Quote. Through this ITB/RFQ the Georgia Department of Transportation (hereinafter, "the State Entity, Department, Agency, or GDOT") is seeking bids for Bridge Maintenance and Repair. The qualified firms who have been awarded a Master Service Agreement (MSA) through the prequalification process #48400-410-000021912. All respondents to this ITB/RFQ are subject to same terms and conditions of the MMSA 48400-410-000021912, subsequent awarded contract, and the ITB/RFQ Form, and are cautioned to completely review the entire ITB/RFQ and follow instructions carefully. The Department reserves the right to modify existing provisions or include additional provisions, which are not currently addressed herein and further reserves the right to reject any or all bids, and to waive technicalities and informalities at its discretion.