Renovation of a mixed-use development in Dallas, Texas. Completed plans call for the renovation of a medical facility; and military facility.

Location: VA NORTH TEXAS HEALTHCARE SYSTEM VA Dallas 4500 S. Lancaster Rd., Dallas, Texas 75216. Background: Doors and Door Frames in the following areas are damaged beyond repair and need to be replaced. Freight Elevator Entrance on first floor across from the Lab ED XR Ray Room Entrance or By Room 5B.706 | building 1: 5th floor door. Period of Performance: June 15, 2023 through December 15, 2023 Place of performance: VA North Tx Healthcare Systems Description of Work: Contractors are to supply and install the materials in the following locations. Freight Elevator Entrance on first floor across from the Lab 1 88 X 84 Door Frame 2 3'-8" X 7' PLAM Door Leaves 2 6" X 27" Vision Kits with Pyran Glazing 2 Full Mortise Continuous Hinges XR Ray Room Entrance 1 88 X 84 Door Frame 2 3'-8" X 7' PLAM Door Leaves 2 Full Mortise Continuous Hinges OR By Room 5B.706 1 88 X 84 Door Frame 2 3'-8" X 7' PLAM Door Leaves 2 6" X 27" Vision Kits with Pyran Glazing 2 Full Mortise Continuous Hinges Building #1 5th Floor SN Mental Health (2) 3'x 7' Hollow Metal Door Leaves (non-fire rated) (1) 6' x 7' Hollow Metal Door Frame (2) Cal Royal 7700 Series Concealed Vertical Rod Exit Devices (2) Pull Trim (one with Keyed Rim Cylinder) (2) Heavy Duty Hydraulic Door Closers Additional items needed 1 91" Horton 4100 Series Automatic Dual Simultaneous Swing Door Operator (88" DOW) Clear Anodized Finish 1 Overhead Mounted Presence Sensor 4 Door Mounted Sensors 2 D.C.U. Wireless Wave Plates (Stainless Steel Finish) One Year Warranty on all parts and labor. Hours of Performance: Services Shall be available 24 hours a day. Check in Requirements: The Field Service Engineer must report to Engineering Service Office Building 9 to obtain a badge and sign in with the Engineering Service before work begins. Submit any mobile media devices that would be used on the system to a virus scan. Documentation: Contractor shall furnish a detailed field service report upon completion of work to the COR. Payment will not be processed until a properly completed service report is received. The service report shall contain, at a minimum, the following information: o Type, model, and serial number (s) of all equipment on which maintenance was performed o Total time spent performing maintenance. o Detailed narrative description of the services required o Date and time the installation is completed The service report shall itemize every item in the specification. Each item shall state the "as found" condition or values, the "calibrated to" or "adjusted to" values, the factory design tolerances, and a complete description of all work performed concerning the items. Included will be a list of new parts used and recommended future repairs. Program Office Points of Contact: Jerry D. Reese