Renovation of an educational facility in Montreal, Quebec. Completed plans call for the renovation of a educational facility.

Reference Number: 1725504 Deadline for receipt of complaints: 2023-05-29 The Université de Montréal is issuing a call for tenders to retain the services of a general contractor to carry out redevelopment work on two U-wing premises on the 4th floor of the Roger-Gaudry building located on its Mountain campus. Summary of the project and the work to be carried out: The wingtip replacement project is separated into two different lots, Lot 1 of which consists of replacing the canopies on levels 2 to 7 located punctually at the end of the S-T-U-V wings of the Roger-Gaudry pavilion. This work will be carried out in parallel with other work on the Roger-Gaudry Pavilion, such as the project for the reallocation of the Roger-Gaudry Pavilion spaces. As part of the current canopy replacement project, the contractor who was mandated for the work on Lot 1 had carried out the following work in rooms U-440 and U-440-1 before the start of work on Lot 2: A temporary partition had been erected between the floor slab and the sub-slab of the upper floor to isolate room U-440. A temporary partition had been constructed in rooms U-440-1 and U-440 from the top of the window sill to the underslab of the upper deck to separate the outside from the inside with a fire resistance level of 1 hour. The gypsum wall that existed along the windows from the outside was demolished. The perimeter bulkhead will be demolished as part of future work on Lot 2. Lot 2 consists of redeveloping the two laboratories of rooms U-440 and U-440-1. In general, the following work will have to be carried out in the two premises mentioned: Dismantling of acoustic ceilings. Blow of the wall at the base of the windows for mechanical installation. Blows for mechanical installations. Construction of a new partition between the two rooms U-440 and U-440-1. Painting of the walls. Replacement of the shelf located along the windows containing integrated ventilation grilles. Resurfacing of the epoxy floor finish. Manufacture and installation of new integrated furniture. Installation of a new suspended ceiling. Reinstall the blinds on the new windows. The mechanical work includes the modification of the ventilation to meet the new architectural layout, the relocation of laboratory equipment and services that must be connected to it such as humidifiers and chemical hoods. It is also necessary to have a connection of the plumbing to the new sinks, eye washers and fume hoods as well as the modification of the fire protection network. In addition, electrical work includes the replacement of lighting fixtures and the reconfiguration of the ceiling frame as well as the installation of new electrical and data outlets to meet the new layout. Eventually, ventilation systems will have to be rebalanced. The Contractor undertakes to take all necessary measures to respect the schedule scheduled to begin work on or about 2024-01-08 allowing the issuance of the provisional Certificate of Acceptance no later than: 2024-05-15. Final acceptance is expected by mid-June 2024.