Site work and paving for a civil project in Kirkland, Quebec. Completed plans call for site work for a road / highway; and for paving for a road / highway.

Reference number : 1729140 Deadline for receipt of complaints: 2023-06-12 Submission sent electronically accepted: Yes, in a single submission document Duration of contract: August 8 to October 31, 2023 The tenderer must provide a 10% tender guarantee. The City of Kirkland is requesting quotes for the removal of existing poles and streetlights and the installation of new poles and LED streetlights on the existing concrete bases. The successful bidder must connect and verify the operation of the new installation. The contractor must provide, without limitation, labour, materials, equipment, tools, hardware, supervision and all services necessary to perform the work requested, according to the prescribed requirements. to the quote. The city will supply the new shafts and lampposts. The summary scope of work is as follows: Collection of shafts and light fixtures from the municipal workshops (located at 25 rue Claude-Jodoin) as well as their transportation to the installation site. Pick-up coordination must be done with a City representative. The uninstallation of the existing poles and luminaires and their replacement with new poles and LED luminaires on the existing concrete bases, according to the indications in the specifications and their connection to the electrical circuits. This work must be carried out under the supervision of a master electrician; The supply of skilled labour, equipment, transportation and signage to carry out the work specified in this contract according to the Electrical Code, the rules of the trade, the manufacturer's recommendations, the indications in the specifications and directives from the Director of Public Works or his representative ; The supply and installation of earth continuity cables in the drums with the accessories according to the estimate. Reinstall the base of the barrel on the existing base including the signage; In the event that the bolt circle is larger than the circle of the new barrel, the successful bidder must supply and install a transition plate model CP6950-BK-TX from Cyclone including the 3/4'' nut bolts adapted for this configuration . (Item 3 slip). Mechanical anchors as needed according to the detail in appendix IV (item 4 of the schedule) Chemical anchors as needed (item 5 of the schedule) Safe disposal of removed equipment. Dismantling and removal of debris.