Site work and new construction of a water / sewer project in Cumberland, Rhode Island. Completed plans call for the construction of a water / sewer project; and for site work for a water / sewer project.

The work in this Contract includes, but is not limited to, the construction of a new pump station to be located at the southeast end of the existing pump station property at 68 Abbott Street, Cumberland, RI 02864. The Work also includes all necessary site and utility work necessary to connect to the existing facilities and demolition of the existing pump station. DESCRIPTION A. The work of this section includes all labor, materials, tools, equipment, and accessory items and performing all operations necessary to furnish and install the complete electrical work in accordance with this section of these specifications, the drawings and the standards of the applicable codes listed herein. B. The work shall include, but not be limited to, furnishing and installation of equipment and items listed below and installation only of items furnished under other sections of these specifications. 1. Complete electrical building service as hereinafter specified. 2. Conduit, wire and electrical connections are required on certain items specified in sections of these specifications other than the electrical section. This Contractor shall examine all sections of these specifications to determine the complete scope of the electrical work. 3. Raceways and fittings 4. Wires and cables 5. Miscellaneous equipment 6. Panelboards 7. Lighting systems 8. Generator 9. Grounding systems 10. Underground system 11. Demolition of existing electrical systems. C. Mount and wire operator's stations, power conversion equipment, and motor control systems furnished under other Divisions of these Specifications. D. Mount and wire process instruments and control cabinets furnished under other Divisions of these Specifications. Furnish and install all conduit, wire and interconnections between process instrumentation primary elements, transmitters, local indicators and receivers. Mount and wire all lightning and surge protection equipment at process instrumentation transmitters and receivers. D. Mount and make field connections to packaged equipment furnished under other Divisions of these Specifications. F. Documents Applicable to the Work of this Section: 1. Division 0 of the Contract Documents (Contract Forms and Requirements). 2. Division 1 of the Technical Specifications. 3. Technical Specifications: Section 16000 - Basic Electrical Requirements, and the following sub-sections: a. Section 16060 GROUNDING SYSTEM c. Section 16080 UNDERGROUND SYSTEMS b. Section 16085 MISCELLANEOUS EQUIPMENT c. Section 16120 WIRE AND CABLES d. Section 16130 RACEWAYS AND FITTINGS e. Section 16442 PANELBOARDS f. Section 16500 LIGHTING SYSTEM g. Section 16612 ENGINE GENERATOR The successful Bidder must furnish 100 percent Performance and Labor and Materials Bonds. Bid Security: Certified, treasurers or cashier's check or bid bond in the sum of five (5) percent of the Total Bid is required. Time for Completion for this project shall be 365 consecutive calendar days from the date stipulated in the Notice to Proceed to commence the Work. The Owner and Engineer, being considered the sole and only judge, reserves the right to waive any informalities in, or to reject, any or all bids, should the Owner deem it to be in the owner's best interest to do so.