This is a service / maintenance or supply contract in Hilo, Hawaii. Contact the soliciting agency for additional information.

Power quality provided by UPS: UPS shall provide reliable sine wave electrical wave forms. Power sine wave shall be provided at a 50/60 hertz with acceptable error of +- 3Hz Input Power: Input power connector shall be NEMA 5-20P. The input power voltage shall be AC 120 volt. Batery power storage capacity shall be 2200VA / 1800W. Batery shall be Leak-proof, Maintenance free, Sealed. Outlets shall be grouped into two switched groups of three outlets shall be provided to isolate critical hardware during prolonged power outages. Outlet connectors shall be NEMA 5-20R (UPS and surge). Outlet voltage shall be AC 120 volt. Batery shall have the capability to have additional bateries connected should run time need to be extended. These shall be purchased separately. Power shall be provided using a double conversion process during powered operations. Unit shall be free standing and have the ability to be converted to rackmount in the future with additional components. Human User Interface: Unit shall have an LCD screen that displays information to the user. The following information shall be displayed at a minimum: Alarms, remaining batery time, and batery charge levels Warranty shall be: 3-year UPS,2-year Batery warranty. Network management card shall be installed with the following characteristics: Compatible with 3 with PowerChute Network Software, have one ethernet gigabit RJ-45 port . Software shall support SMTP, TCP/IP network protocols, IPv4 support, IPv6 support, and RADIUS support. Network management card shall be managed with the following remote management protocols: HTTP, HTTPS, SNMP 1, SNMP 2c, SNMP 3, SSH, SSH-2, Telnet