Site work and renovation of a transportation facility in Denison, Texas. Completed plans call for the renovation of a transportation facility; and for site work for a transportation facility.

The selected vendor shall furnish the necessary labor, equipment and materials to remove old fencing and to furnish and install all new fencing components including, but not limited to, the following: a) Gates b) Fencing c) Concrete Footings d) Posts e) Hardware (latches, railings, etc.) f) Attachments to current structures or fencing in place Fencing Requirements: 1. Construct approximately 5,200 linear feet of 7ft overall chain link fence 2. Use 4in full weight gate post, 2 7/8 (3 inch) SS20 terminal posts, 2-3/8 SS20 line posts, 1-5/8 065 top rail, 6 feet #11 gauge galvanized after weaving (GAW) chain link, and all galvanized pressed steel fittings. 3. All posts to be set in high strength cement in accordance with AFA and TFA standards. 4. Shall include three strands of 12-1/2 gauge four point barb wire fence above the installed overall fence Walk Gate Requirements: 1. Construct all new materials and labor for swing gates using 2-7/8 (3 inch) SS20 gate posts. 2. Frame to hinge on heavy duty industrial box style hardware with lockable fork latch. *Swing gate frames to be 1-5/8 inch welded frame. Gates over 6 feet in length shall have "T" bracing and trussed. Dive Gate Requirements: 1. Construct all new materials and labor for double drive swing gates using 4 inch full weight gate posts. 2. Frame to hinge on heavy duty industrial box style hardware with lockable fork latch. *Swing gate frames to be 1-5/8 inch welded frame. Gates over 6 feet in length shall have "T" bracing and trussed. Cantilever Slide Gate Requirements: 1. Construct all new materials and labor for cantilever gates. Gates shall have 20 feet opening using 4 inch full weight gate posts, 2- 7/8 (3 inch) SS20 terminal posts, using "nylon" cantilever casters with UV covers, and industrial lockable slide gate latch. Slide gate frame shall be 2- 3/8 full weight with 1-7/8 (2 inch) uprights, 1-5/8 cross bracing, 1- 7/8 (2 inch) double braced barb arms, and 1 7/8 (2 inch) "sway/brace" arm. If you have any questions, please contact Grayson County Purchasing Agent at plattj@co.grayson.tx.us. To provide for a contract commencing on the date of award and completion no later Than september 30, 2023. It is understood that the commissioners court of grayson county, texas and the Rma board reserves the right to accept or reject any and/or all bids for any or all products And/or services in this bid request and to waive informalities or defects in the bids or to accept Such bids as it shall deem to be in the best interest of grayson county