Site work for an educational facility in Brentwood, New York. Completed plans call for site work for a educational facility.

Bid Description: Exterior and Interior Building Signage Fabrication and Installation Bids must be made upon and in accordance with the forms and documents provided by the college, which will contain accompanying instructions to bidders. Contact Seema Menon E-mail Address menons@sunysuffolk.edu; Contractor shall, fabricate and install exterior and interior building signage on the Suffolk Federal Credit Union Arena at the Michael J. Grant Campus. The work includes partially remove existing signs, and fabricating and installing signs as identified herein. The Campus location is as follows: o Michael J. Grant Campus: 1001 Crooked Hill Road, Brentwood NY 11717 Contractor shall fabricate and install interior and exterior signage at the Suffolk Federal Credit Union Arena on the Michael J. Grant Campus in accordance with the following specifications: 1. Main Lobby Branding (see attached image for concept and sizes) - all materials must be provided and installed (See Images A-1, A-1A, A-2, A-2A, A-4 & A-5) (Bid Price No. 1 and Bid Price No. 2) a. Remove and dispose of the Top Text - "Suffolk Federal Arena Credit Union - Overall size approximately 24'w x 3'h - 2" thick. Patch existing holes in gypsum board panels, paint to match. b. Install Logo & Top Text - "Suffolk Credit Union Arena - Overall size 24'w x 3'h - 2" thick dimensional lettering / MDF or PVC / Pin mounted to wall / High quality painted finish custom PMS color match / drill template provided for install. c. Remove Door Graphics for Credit Union only (shark logo to remain) in east and south lobbies. - Overall size approximately 36"w x 24"h. Clean and prepare door to provide smooth surface, paint as needed to match existing. d. Door Graphics (east and south lobbies) - Overall size 36"w x 24"h / Printed graphics of SCU logo / CAD cut to shape / 1 printed lot designs / 8 of each / Material spec - 3M- IJC180CV3 / gloss overlaminate #8518 / weeded and paper masked for installation. 2. Exterior Building Sign (see attached image for concept and size) - all materials must be provided and installed (See Images A-3, A-3A, A-4 & A-5) (Bid Price No. 3) a. Remove and dispose of existing Suffolk Federal Credit Union Arena sign and logo (approximately 52'w x 7'h ) as shown in the attached layout. (See Image A-3). Contractor shall properly dispose of all lighting bulbs within the existing lighting sign/fixtures and provide manifests and documentation of their disposal. Remove existing fasteners and patch all holes in the exterior surface with siliconebased caulk with color to match panels. Disconnect electrical power within the building back to the disconnect switch located at the base of the sign within the building. b. Supply and install a new 35'w x35'h Suffolk Credit Union Arena sign and logo to the exterior of the Building as shown in the attached layout. (See Image A-3A) c. Sign is constructed of .125 pre-finished durabond aluminum (rated for external use) and 3/16" acrylic plexiglass with vinyl applied to the face to create corporate colors of the SCU logo. All colors to be UV resistant. d. Sign includes 1" jewelite trim or metal molding e. Sign includes Qwik Mod Series (or equivalent) LED lighting (see section 3. Below for additional requirements). f. All components to be UL listed g. Sign seams in returns to overlap to prohibit water entry h. Sign requires weep holes in all letters i. All exposed GTO wire to be enclosed in 1/2 " conduit j. Structural Connection to Building: Contractor shall submit shop drawings designed, signed and sealed by a licensed NYS Engineer. The sign, its structure, additional structural steel and connections must be designed to meet the current building code of NYS and all of its supplements including but not limited to withstanding 140 mph wind loads. The existing building panels are a 2" thick metal, insulated panel system. k. All electrical connections and runs to be completed by a licensed electrician l. Sign to be constructed on an aluminum square tube framing with minimum sized 2"x2" square tubing with 1/4 " thick walls and 6"x6"x1/4" corner support angles located at each corner. m. Sign designed and fabricated with Front and Halo-Lit Channels with Cloud. Vinyl faces colors to be UV resistant exterior grade ink. College will provide SCU graphic files and colors post bid. - Digital Print of SCU logo - Trim: White - Returns: White - Backs: Clear -Cloud: White - Illumination: White n. New sign to be connected to existing electrical disconnect switch located in the gym at the bottom of the metal wall panel system. Existing electrical time clock and electrical panel are located in Lecture Hall Projector room near East Lobby. o. Controller: Contractor to provide and install an interior grade, UL listed, electronic timer as manufactured by Intermatic. Timer to be installed in Projector room noted above in item m. p. Contractor shall provide a minimum of 2-year parts and labor warranty for the sign assembly and 5 years for the LED lighting. Bid-Results:- 1.MAIN LOBBY TOP TEXT SIGN NONDIMENSIONAL LETTERING AND LOGO - American Signcrafters- $9,743 2.EAST AND SOUTH LOBBY DOOR GRAPHICS-Going Sign & Servicing Company, Inc.-$1,200 3.EXTERIOR BUILDING SIGN AND LOGO - PIN MOUNTED INSTALLATION-Austin Interiors-$97,395 4.GRAND VIEWING CEREMONY-Austin Interiors-$3,430