The DPMC is seeking to engage the services of an architecture firm with the objective to perform new or final programming, design and construction administration services to facilitate the renovations, reconfigurations and
expansion at the PHEAL. This project is being advanced after conclusion of a programming and feasibility study for the expansion of the laboratory, administration and warehouse spaces at the PHEAL. Originally, the Feasibility Study Consultant was tasked with
analyzing potential options to add 60,000 square feet of laboratory space, 10,000 square feet of administration space and 10,000 square feet of warehouse space. Additional consideration was given to vehicular access, parking and reuse of the
mostly unused AHRF building. The consultant shall be a firm prequalified with the DPMC in: Architecture (P001) with a dollar rating of Unlimited. The firm shall also have in-house capabilities or identify sub-consultants prequalified in the following disciplines:
1. Electrical Engineering P002,
2. HVAC Engineering P003,
3. Plumbing Engineering P004,
4. Civil Engineering P005,
5. Soils Engineering P009,
6. Fire Protection Engineering P010,
7. Estimating/Cost Analysis P025,
8. Roofing Inspection P028,
9. CPM Scheduling P030,
10. Value Engineering P033 and
11. Security Systems P048 The proposer should also identify all additional architectural, engineering and specialty consultant disciplines necessary to complete the project as described in the scope of work.
The Consultant's team shall have in-house capabilities or Sub-Consultants with Subject Matter Expert (SME) experience in planning and design in public health facilities constructed for diagnostic laboratory testing and Bio Safety Level
preparedness. Laboratory planning consultants do not need to be pre-qualified with DPMC.
The Consultant must also have in-house capabilities or retain the services of a Sub-Consultant with extensive experience in the design of diagnostic Health, Environmental, and Agriculture Laboratory Facilities similar to that described in this
scope of work. A description of those projects shall accompany the technical proposal submitted for evaluation by the Consultant Selection Committee. all consultant(s)/sub-consultant(s) participating on the project team must be separately prequalified by DPMC in the discipline(s) for which they will be providing professional services. If a firm is not currently prequalified, a
completed prequalification application must be received by Thursday, July 27, 2023, no later than 4:00 PM in order for a firm to be eligible to submit on this project.
.webp)
