This is a service / maintenance or supply contract in Springfield, Virginia. Contact the soliciting agency for additional information.

----ORIGINAL ANNOUNCEMENT BELOW---- This Sources Sought Notice (SSN) is for informational purposes only. This is not a "Request for Proposal (RFP)". It does not constitute a solicitation and shall not be construed as a commitment by the Government. Responses in any form are not offers and the Government is under no obligation to award a contract from this announcement. No funds are available to pay for preparation of responses to this announcement. Therefore, the Government will not be liable for payment of any preparation expenses and information and materials received in response to this SSN W909MY-23-R-G002A and is in no way obligated by the information received. Any costs incurred by interested companies in response to this announcement will not be reimbursed. Any information submitted by respondents to this technical description is strictly voluntary. Responses will not be returned to the responder. Not responding to this notice does not preclude participation in any future request for quote (RFQ) or invitation for bid (IFB) or RFP, if any issued. If a solicitation is released, it will be synopsized on the Government-wide point of entry (GPE) at SAM.GOV. It is the responsibility of potential offerors to monitor the GPE additional information pertaining to this requirement/SSN. Interested parties are responsible for adequately marking proprietary or competition sensitive information contained in their response. The Government shall not be liable for or suffer any consequential damages for any improperly identified proprietary information. It is the responsibility of the potential interested parties to monitor this site for additional information pertaining to this requirement. NOTE: The use of SSN W909MY-23-R-G002A is for tracking purposes only and shall be referenced in any responses to this subject solicitation. All interested parties are encouraged to respond by submitting a response by the due date specified in this solicitation notice. This market research may be used by the Government in developing a future production acquisition strategy and Statement of Work for production of Power Distribution Illumination Systems, Electrical (PDISE). PDISE is a family of power distribution equipment which transmits electrical power between military generator sets and using equipment. Based on the responses to this SSN and government market research, this requirement may be set-aside for small businesses (in full or in part) or procured through full and open competition. Telephone inquiries will not be accepted or acknowledged, and no feedback or evaluations will be provided to companies regarding their submissions. DESCRIPTION The US Army Contracting Command-Aberdeen Proving Ground (ACC-APG) Belvoir Division is seeking sources for PDISE equipment, on behalf of PM E2S2 as a means of conducting market research. These sources shall have the capability to manufacture, test, and deliver power distribution equipment used by the US Army. This equipment includes ruggedized power distribution systems, Military Class-L connectors, and associated cable assemblies. PURPOSE The purpose of this Sources Sought is to identify potential sources who have the capability to fully and effectively interpret government specifications and government furnished Technical Data Packages (TDPs) to manufacture PDISE. These TDPs include both specifications and drawings which describe the details, performance, and conformance testing of this equipment. TDPs are available upon request for the PDISE presented in Requirements. In addition, potential sources must be fully capable of conducting production conformance testing in accordance with MIL-DTL-53126. The PDISE equipment is expected to be procured over a 5-year period. The contract is expected to be a Firm Fixed-Price, Indefinite Delivery Indefinite Quantity (IDIQ) type contract using Government furnished Technical Data Packages (TDP). The Primary Work Location will be the Contractor Facility. REQUIREMENTS PDISE is a military version of a portable circuit breaker box or panel with various sizes of circuits and circuit overload protection. PDISE includes cables used to connect the generator to the load. PDISE includes a utility kit which can be used to illuminate the field shelters. PDISE is capable of, singularly or in combination with each other, being connected direct to generator sets ranging from 5 kilowatt (kW) to 200 kW. Users can establish operation within 30 minutes to 4 hours of arrival at a site. The PDISE are: M200 A/P PDISE, Electrical Feeder System: (NSN 6150-01-308-5672) M100 A/P PDISE, Electrical Feeder System: (NSN 6150-01-308-5671) M40 A/P PDISE, Electrical Distribution System: (NSN 6150-01-307-9446) M60 A/P PDISE, Electrical Distribution System: (NSN 6150-01-307-9445) M46 PDISE, Electrical Utility Assembly: (NSN 6150-01-208-9751) M200 A/P Electrical Feeder System: The M200 is capable of accepting 120/208V, three phase, 50/60 Hz input from the generator source. It has one (1) 200 Amp input circuit with three (3) 100 Amp, four (4) 60 Amp and one (1) 20 Amp output circuits. The system o includes a 5-feet pigtail and four (4) 25-feet 200 Amp feeder cables. M100 A/P Electrical Feeder System: The M100 is capable of accepting 120/208V, three phase, 50/60 Hz input from the generator source. It has one (1) 100 Amp feed-through input and output circuit and two (2) 60 Amp, two (2) 40 Amp and two (2) 20 Amp output circuits. The system includes 5-feet pigtail and two (2) 50-feet 100 Amp feeder cables. M40 A/P Electrical Distribution System: The M40 is capable of accepting 120/208V, three phase, 50/60 Hz input from the generator source. It has one (1) 40 Amp input circuit and twelve (12) 20 Amp single-phase output circuits. The system includes a 5-feet pigtail, two (2) 50-foot 40 Amp distribution cables, extension cables, Ground Fault Circuit Interrupter (GFCI) cables, and duplex receptacle. M60A/P Electrical Distribution System: The M60 is capable of accepting 120V, single-phase, 50/60 Hz from the generator source. It has one (1) 60 Amp input circuit and six (6) 20 Amp output circuits. The system includes a 5-feet pigtail, one (1) 100-feet distribution cable, extension cables, GFCI cables, and duplex receptacle. M46 Electrical Utility Assembly: The M46 Utility Assembly is similar to wall outlets in a fixed facility. The M46 comes in a transit container that contains branch circuit assembly, cables, lights, and duplex receptacles. The dimensions (in inches) and weight (in pounds) of the PDISE are: M200: Length 33.5, Width, 22.97, Height 20.37, Weight 140 M100: Length 24.25, Width, 22.35, Height 20.37, Weight 77 M40: Length 24.25, Width, 21.74, Height 16.12, Weight 55 M60: Length 24.25, Width 21.74, Height 15.5, Weight 45 M46: Length 41.00, Width 21.00, Height 25.00, Weight 100 Summary of PDISE Preservation, Packaging, Packing and Marking (PPPM) Requirements The PDISE M200, M100, M40, and M60 are packed and crated for storage and transit. The PPPM requirements are defined in the Technical Data Package (TDP). The PDISE feeder and distribution systems are packed in a plywood and lumber crate conforming to ASTM D6251, Type III, Class 2, and Style A, modified and sized to their respective TDP. The approximate dimensions (in inches) for crated PDISE are: M200: Length 94.00, Width 42.00, Height 31.00 M100: Length 76.00, Width 37.00, Height 33.00 M60: Length 48.00, Width 35.00, Height 24.75 M40: Length 48.00, Width 35.00, Height 24.75 The M46 utility kit is transported and stored in a reusable Grade 2 polyethene case suitable for extended use in extreme climate. All questions must be submitted to the Contract Specialist and Contracting Officer identified below no later than (NLT) 30 June 2023 by 3:00 PM Eastern Standard Time (EST). For your questions refer to the attached file entitled PDISE Format_Questions and Responses and list the section of concern, description, and specific question(s). All data received in response to this Sources Sought that is marked or designated as corporate or proprietary will be fully protected from any release outside the Government. No classified information shall be submitted. No phone calls will be accepted. The point of contact telephone numbers are NOT active and email-only questions or responses are encouraged as specified with the emails above, Contract Specialist and Contract Officer listed below. The Government is not committed nor obligated to pay for the information provided, and no basis for claims against the Government shall arise from your response(s) to this Sources Sought. The deadline for response to this request is NLT 14 July 2023 by 3:00 PM EST. All responses under this Sources Sought must be e-mailed to the Contract Specialist at Tony Adams, email: tony.d.adams10.civ@army.mil and the Contracting Officer Danny Lester at his email: danny.w.lester.civ@army.mil.