Renovation of a municipal facility in Omaha, Nebraska. Completed plans call for the renovation of a municipal facility.

Questions Deadline: 7/26/2023 02:00 PM (CT) Bidders must submit bid questions in the Questions tab of the bid event. Questions will be answered within one (1) day of the questions cutoff date/time. 9" Roofing Overhang Dimensions Interior Dimensions 6' Exterior Dimension 6'-6" Overall Dimension 8' Interior Dimensions 10' Exterior Dimension 10'-6" Overall Dimension 12' Installation: To be included Shipping & Handling to 68102: CLASS A EXTERIOR WALLS- RATED FOR 115 MPH WIND LOADS STEEL BOTH SIDES OF WALL (S/S): 32 LF @ 8 FEET TALL ONE POUND DENSITY POLYSTYRENE CORE: EXTERIOR ROOF 1/4 :12 PITCH PANELIZED SHED ROOF W/ 9" OVERHANG: 96 SQUARE FEET DOORS 20 GAUGE INSULATED STEEL WITH 1/2 GLASS: 1 EACH WINDOWS EXTERIOR DIVIDER STRIP PICTURE WINDOW: 7 EACH Picture windows shall be nominal 3'8" wide X 3' high (Other sizes used and available to fit certain building sizes). They shall be installed 42" off the floor. A window will be glazed with 1/2" clear insulated tempered glass and shall be an integral part of the wall panel. The window shall be non-opening, and the entire window frame shall be painted by AAMA Specification 603.8. ELECTRICAL Will provide (1) wall switch preps, (4) duplex receptacle preps, (2) data, communications preps, and (1) 110-volt lay-in 2x4 LED fixtures (75 FC at desk height). Conduit and wiring are not included. This package shall meet NEC (current edition). LED FLOOD LIGHT: 2 EACH 120-volt LED style flood light with (2) round-shaped heads surface mounted and emit 4000k photocell sensor is included and no bulbs are needed. LOAD CENTER: 1 EACH 125 AMP SINGLE PHASE 120/240 Volt 8 SPACE MAIN LUG LOAD CENTER GE TLM812SCUDP: The electrical service shall include an indoor load center of sufficient amperage and circuit capacity to handle all lighting loads, receptacles and HVAC systems. HVAC HVAC - COOLING & HEATING-THROUGH THE WALL UNIT: EACH The air conditioner shall be 9,000/8,700 BTU AC with 10,700 / 8,500 Electric Heat. The unit shall be a through-the-wall type with panel preparation included. The unit shall be 230/208V, 60HZ, 20 AMP.