Site work and paving for a playground / park / athletic field in Seaford, Delaware. Completed plans call for site work for a playground / park / athletic field; and for paving for a playground / park / athletic field.

The City Manager and staff will then evaluate them for compliance. The bids may be presented to the Mayor and Council at their regular meeting on August 22, 2023 at 7:00 p.m., in the City Hall Council Chambers, 414 High Street. They may be awarded at this time. The Mayor and Council reserve the right to reject any and all bids. Bids must be submitted in a sealed envelope, addressed ATTN: Charles Anderson, City Manager, City of Seaford, P.O. Box 1100, Seaford, DE 19973. The outside of the envelope must be marked Attn: City Manager, Hurley Park Drive Paving Extension, and the bidder s name shall be shown thereon. All proposals must be made on the bid form provided in the specifications. All proposals must conform to the bid documents. Faxed or e-mailed bids will not be accepted. Any exceptions will be evaluated for suitability and acceptance is at the sole discretion of the owner. The successful bidder shall also secure and maintain, at its own expense, during the contract term, the types and limits of insurance outlined in the contract documents. No bids may be withdrawn after the scheduled time from the receipt of bids for a period of thirty (30) days. The City of Seaford reserves the right to reject any and all bids and to waive any or all informalities in any bid or bids. Sealed bids are being accepted for the proposed street improvements as outlined herein. The intent is to contract with one firm for paving of the Hurley Park Drive Road extension. Hurley Park Drive will need milling, fine grading, base coat, and top coat of paving. The prices bid for furnishing hot mix shall include all necessary butt joints, incidental milling, utility adjustments and any other work necessary to produce a smooth transition between the new work and all existing locations adjoining the proposed installation. The successful contractor is to perform any required survey work to produce a true line, grade and profile of the road to be constructed and paved. The intent is to install the hot mix in a manner that will completely drain and prevent excessive amounts of standing water during and after rain events. Material to be used is hot mixed, hot laid, bituminous concrete mix Type B & C (or equivalent). The successful bidder shall submit a specification of the material and the source of supply to the owner for approval with his bid. Bituminous concrete shall be spread by a spreading and finishing machine. Equipment shall be self-propelled type, approved by the Director of Public Works and capable of spreading the mixture true to the line, grade, width and crown specified. This equipment shall also be provided with means for heating the screed members so that it will prevent the accumulation of asphalt material. An application of CRS-1 or RS-1 asphalt cement tack coat (or equivalent) shall be applied on all surfaces before placement of the hot-mix concrete on the roadway. All other specifications necessary for the completion of the roadwork and not mentioned herein, shall conform to the State of Delaware Standard Specifications for Road and Bridge Construction, Section 401, Hot Mix; Hot-Laid Bituminous Concrete Pavement dated July 1985. The contractor shall provide all necessary labor, materials, equipment, sweeping, grading, tacking, cutting butt joints, and necessary traffic control. The intent of this bid is to provide all necessary work for a complete job. Signs, barricades, lights, and other necessary incidentals to detour traffic shall be furnished and maintained by the contractor at his/her expense. The contractor is solely responsible to remove all vegetation from roadway surface and edges prior to paving. The contractor is to furnish all labor and materials necessary to raise or lower the elevations of all existing manhole lids if needed. The intent is that all utility obstructions of whatever nature be adjusted by the contractor to the final line and grade of the finished street. Upon completion of paving operations all manhole covers, catch basins grates, and water valve box lids shall be free of asphalt and functional (removable) after the paving is complete. The intent is that all utilities be adjusted by the contractor to the final line and grade of the finished street.