This is a service / maintenance or supply contract in Westville, Oklahoma. Contact the soliciting agency for additional information.

This proposed contract is for approximately 151 hours of clearing woody vegetation and brush on various locations within the Barren Fork Wildlife Management Area (WMA) located near Westville, OK. Mulching of all trees 8 or less will be done within the boundary of designated areas. All trees and brush removed will have stabs/stumps mulched to less than 2 inches above ground level. Once the contract has been awarded, the exact areas for mulching will be determined by ODWC area personnel based on weather and terrain conditions. Equipment Requirements: Equipment Requirements: The equipment to be used must meet the following minimum specifications: Forestry Mulching equipment, minimum of 100 HP, rubber tracks, forestry mulching head, and must include an operator. Contract Specifications: Contractor is to provide all labor and needed equipment to complete the work as required. Operator will not be compensated for time spent on maintenance and repairs of equipment, including greasing or fueling of machine. Please contact me if you have any questions or concerns. Rebekah Pennington Certified Procurement Officer Headquarters 1801 N. Lincoln Blvd. Oklahoma City, Oklahoma O: (405) 522-5762 wildlifedepartment.com Project must not begin until after July 31st Project must be completed within 120 days of contract award and/or by December 31, 2023, whichever is sooner. All work will be done as directed by the ODWC Area Biologist or ODWC Area Wildlife Technician. The Owner reserves the right to make any inquiries to ensure that the lowest bidder can complete the work in a satisfactory manner. Bonds are required for any contract where the firm, fixed price contract sum equals or exceeds fifty thousand dollars ($50,000), or where an individual work order under a non-binding service or maintenance contract exceeds fifty thousand dollars ($50,000). a. Performance Bond for 100% of the value of the Contract to insure completion of the Work. b. Defect Bond for 100% of the value of the Contract to provide correction of defects in the construction and equipment for one year after acceptance of the Work; and c. Payment Bond for 100% of the Contract to assure that the Owner is protected from the action of Subcontractors, suppliers and employees for unpaid debts of the Contractor.