This is a service / maintenance or supply contract in Los Angeles, California. Contact the soliciting agency for additional information.

Naics 423840 matl code 2745607 ft Moulding, wood, ground wire, 1/2-inch size: 7/8-inch high x 1-inch wide with 1/2-inch groove width, 1/2-inch groove height x 8-feet long, wood shall be: douglas fir, oak, or rock elm, in accordance with ansi o5.5, specification for wood ground wire moulding, and shall meet the requirements of the california public utilities commission general order no.95, rule 22.8a and figure 81 of appendix g. The moulding shall be pressure treated per awpa standard with dcoi or with pentachlorophenol in petroleum oil. Packaging: the moulding shall be packaged in a master bundle of 8,000 feet each. Master bundle break down: * 40 bundles at 200 feet each. * 25 pieces per bundle at 8 feet each. * each bundle shall be secured with a flat sun resistant rope at both ends of bundle. * 10 bundles deep by 4 bundles high. The following packaging is acceptable: The ground wire moulding shall be Packaged in a 2000-piece bundle as follows: 2,000 piece bundle overall package size is 8' long x 46" wide x 46" high, 2,000 pieces Of 8-foot each for a total of 16,000 feet. 2,000 pieces are sub-packaged: 50 pieces Per bundle or two (2) bundles of 25 pieces. Delivery: moulding must be delivered on a flat bed truck that is open and accessible on 3 sides for access by a conventional forklift. Shipping instruction: vendor must certify the type of wood and treatment supplied and must be marked on manifest. The department reserves the right to reject any and all bids. Question Deadline 08/30/2023 at 2:00 PM PT