Renovation of a military facility in Grand Prairie, Texas. Completed plans call for the renovation of a military facility.

Any questions relating to the solicitation before the closing date shall be sent to DONALD OSBORN, ENGINEERING TECHNICIAN, via email at DOSBORNE@BOP.GOV no later than [August 24, 2023 1:00 P.M. CST] 15B50023Q00000003 Amendment 0001 issued to extend the deadline to September 08, 2023 @ 9:00 a.m. CT The Federal Bureau of Prisons (FBOP, South Central Regional Office, U.S. Armed Forces Reserve Complex 344 Marine Forces Drive, Grand Prairie, TX 75051, intends to make a single award to a responsible entity that will provide all equipment, materials, labor and incidentals to install two In-Row CRV systems for server room located inside the Designation and Sentence Computation Center (DSCC) Building 345. All equipment specified in this statement must be brand name or an equal product. Should your firm choose to submit an equal product, you must submit all technical specifications of the equal product to be analyzed and a technical issued with acceptance/non acceptance. This project basis for design is CRO35RA air-cooled 35kW with DX Cooling Coil(s) and a period of of 182 calendar days. Contractor shall supply and install (2) new Liebert air handlers in server room located inside DSCC Building 345 including (2) associated Liebert air-cooled condenser units on rooftop with disconnects. (1) system to be set up as redundant system The solicitation will be distributed solely through the General Services Administration's (GSA) System for Award Management (SAM) website at www.sam.gov. Hard copies of the solicitation will not be made available. The website provides download instructions. Any secure/locked documents (if applicable) uploaded with the solicitation will require an active SAM vendor registration for access. If you encounter problems accessing these documents, please contact the Federal Service Desk at 866-606-8220. All future information about this solicitation, including any amendments, will also be distributed solely through this website. Interested parties are responsible for continuously monitoring this website to ensure that they have the most recent information about this proposed contract action. The NAICS code for this requirement is 333415. IMPORTANT: Any contractor interested in obtaining a contract award with the Federal Bureau of Prisons must be registered in the System for Award Management (SAM) at www.sam.gov. In order to qualify for award, your business size metrics information entered in your SAM registration must be less than or equal to the Standard specified above. Each offeror's SAM registration will be reviewed by the Government. All offerors are urged to double check their SAM registration and update as necessary, including the size metrics information. If you have questions about the System for Award Management (SAM), Government procurements in general, or need assistance in the preparation of your bid/proposal, a local Procurement Technical Assistance Center (PTAC) may be able to help. The Procurement Technical Assistance Program was authorized by Congress in 1985 in an effort to expand the number of businesses capable of participating in the Government marketplace. To locate a PTAC near you, go to web site Install CRV In-Row 10-Ton System(s) This project basis for design is CRO35RA air-cooled 35kW with DX Cooling Coil(s) and a period of of 182 calendar days. Contractor shall supply and install (2) new Liebert air handlers in server room located inside DSCC Building 345 including (2) associated Liebert air-cooled condenser units on rooftop with disconnects. (1) system to be set up as redundant system. of Work Clarification -Rooftop installation shall include required roof rails and roofing patch back ensuring no water leaks. ***(Ref. Attachment D)*** -Contractor shall provide all required crane and rigging. -New systems will utilize R410A or R407A refrigerant. -Air Handler units to be installed on floor inside server room with best air flow determined on- by contractor. ***Reference Attachment B for current rack (s).*** - Certified contractor shall install new line sets from condenser to air handlers, install both 24v control wire and CANbus communication wire between indoor and each outdoor condenser. -Install (2) 480v 3ph 50-amp dedicated circuits to Liebert air handlers. Install (2) 480v 3ph 15-amp dedicated circuits to Liebert condenser on rooftop with disconnects. (All existing electrical distribution equipment is currently Square D brand) ***Reference Attachment B for electric panel locations and estimated feet required for power runs. *** -Install copper 3/8 supply domestic water piping from mechanical room to each air handler for humidifiers. -Install condensate drain piping from each air handler to a floor drain in the mechanical room. -Pressurize refrigerant line set and check for leaks. -Pull vacuum online set below 500 microns. -Charge system with factory charge. -Factory start up on installed equipment. -Include 1 Year entire parts and labor warranty