Demolition, site work and addition to an educational facility in Buffalo, Missouri. Completed plans call for the addition of a 16,527-square-foot, two-story above grade educational facility; for the demolition of a educational facility; and for site work for a educational facility.

The unified bids shall include the Mechanical, Electrical, and General scope of work for the project. For questions regarding the project, contact the architect: Dake Wells Architecture 134 Park Central Sq., Suite 300 Springfield, MO 65806 (417) 831-9904. Matthew Thornton, AIA mthornton@dake-wells.com The Applicator shall cover or otherwise protect finish work or other surfaces not being coated within the scope of this Section. The Applicator shall erect and maintain protective tarps, enclosures and/or masking to contain debris, including dust or other airborne particles from surface preparation or application activities. This may include the use of dust or debris collection apparatus as required at no additional cost to Owner. GENERAL CONTRACTOR List of at least three (3) projects, satisfactorily completed within the past five (5) years, of similar scope and complexity to this project in addition to the requirements as listed in these specification sections. DIVISION 04 - MASONRY List of at least three (3) projects, satisfactorily completed within the past five (5) years, of similar scope and complexity to this project in addition to the requirements as listed in these specification sections. TPO ROOFING Installer Qualifications: A qualified firm that is approved, authorized, or licensed by roofing system manufacturer to install manufacturer's product and that is eligible to receive manufacturer's special warranty. List at least three (3) projects, satisfactorily completed within the past five (5) years, of similar scope and complexity to this project. POLISHED CONCRETE FINISHING List of at least three (3) projects, satisfactorily completed within the past five (5) years, of similar scope and complexity to this project in addition to the requirements as listed in the specification section