Site work for a road / highway in Bloomington, Minnesota. Working plans call for site work for a road / highway.

**As of February 06, 2024, bids were canceled. No definite date for the rebid.** The City of Bloomington will receive sealed lump sum bids until 11:00 A.M., Thursday, January 4th 2024 through the Bids and Tenders web portal. Bid documents will not be accepted in any other location or format. Bid documents sent directly to the City of Bloomington will be returned unopened and not considered for award. Bids will be opened publicly and read aloud during a live WebEx meeting immediately after the specified closing time. A link to the bid opening can be obtained by emailing purchasing@bloomingtonmn.gov. All bids submitted are to be valid for sixty (60) calendar days. Question Deadline: Thu Dec 28, 2023 5:00 PM (CST) The scope of work for this Project shal o Install (2) 1.5" conduits orange/blue throughout project as shown in the engineered drawing. o Install 12 AWG trace wire outside ofthe new conduits. o Install (7) 30"x48"x36" hand hole as shown in the engineered drawings. o Install (7) Triview Test Station 72", with isolation lever. o Install (7) 8' Ground Rods in new HH's. o Install a 144F as shown in the engineered drawings. o Existing Hennepin County Hand hole located in the NE comer of Old Shakopee Rd /CSAH 1 to the new hand hole located on the south side of 110th St east side ofthe Golf Maintenance entrance drive o Install 48F as shown in the engineered drawings o 48F from new hand hole located on the south side of 110th St. j Golf entrance drive into the building. o 48F from the new hand hole located on the south side of 110th St. east side ofthe Golf O' Maintenance entrance drive into the building. o Leave 100' slack coils attached to the sidewall in each hand hole & inside building o All Permits & the following materials will be provided by LOGIS: Conduit, couplers, trace wire, hand holes, tri view test stations, 144 & 48 strand fiber