Site work for a development in Clayton, New Mexico. Completed plans call for site work for a development.

The Contractor will prepare the including grading and dirt work, install a 30' X 30' X 6" deep, 3000 psi concrete slab with fiberglass mixed into concrete, and a 6" wide X 2' deep continuous footing with rebar. The exact will be discussed with USFS personnel; see map. Contractor will install concrete forms (2X6 lumber/steel forms) and make sure the pad will be square. Contractor will supply all materials to install the forms and any other tools needed to pour concrete. Rebar will not be utilized in the floor since fiberglass will be mixed with the Concrete. Concrete will be hauled locally at 3 miles one way (5 min drive). Bull float will be used to get a rough finish on concrete. No vibration equipment will be used. A 10 day advance notice prior to starting concrete work to allow for time to prep for the concrete pad. ERNMENT REQUIRES OF THE WORK DESCRIBED IN THESE DOCUMENTS (Title, identifying no., date) Cibola National Forest Concrete Pad at USFS Clayton, NM Administrative The NAICS for this project is 238110 The for this requirement is less than $25,000.00. This solicitation is a 100% Total Small Business Set-Aside. The Contract Specialist for this project is Anthony R. Love II, email: anthony.love@usda.gov. Instructions for preparation of quotes are located in section L. Any questions shall be provided no later than 09/13/2023 to the aforementioned Contract Specialist. Contractor will provide: preparation including grading, form and finish of 30ft X 30ft X 6in deep 3000psi concrete slab, and 6in X 2ft footings on an administrative in Clayton, NM Cibola NF.