Site work and renovation of a water / sewer project in Baytown, Texas. Completed plans call for the renovation of a water / sewer project; and for site work for a water / sewer project.

Coastal Water Authority - Lynchburg Pump Station Crane Hoist. Should you have any questions or comments regarding the Bid Documents or desire to make a site visit, contact: Jonathon Jung Coastal Water Authority 1801 Main St., Suite 800 Houston, Texas 77002 (713) 800-6256 jjung@coastalwaterauthority.org This project is at CWAs Lynchburg Pump Station in Baytown, Texas. The scope of work includes removing and replacing the existing 16-ton manual chain hoist with a new 16-ton low-head room electric chain hoist per CWAs written requirements and specifications. The Contractor is responsible for all material, labor, equipment, transportation, and supervision to complete the work safely work-likely. The Authority reserves the right to reject, in whole or in part, any or all bids, or to accept any bid, in whole or in part, or any combination of bids it deems most advantageous to the Authority and that will, in the judgment of the Authority, result in the best and most economical completion of the Authoritys work, such bid coming from a responsible Bidder Project: Contractor shall remove existing 16-ton manual chain hoist and replace with a 16- ton low head room electric chain hoist in the basement at Lynchburg Pump Station. Project Location: 908 Independence Parkway N. Baytown, Texas 77520. BID ITEM - 1: The Contractor is responsible for providing labor, tools, supplies, equipment, materials, transportation, and supervision for the removal of CWA's current 16- ton manual chain hoist and the purchase and installation of a new 16-ton low-head room electric chain hoist according to the specifications given. The unit price in the price sheet should reflect the cost of purchasing the new electric chain hoist. Application: Lifting -Outdoor Ambient Temp.: 0-100 Degrees F Radius: No Capacity: 32,000 Lb.'s Lift Height: 35' True Vertical Lift Lift Speed: 2 FPM Load Chain: Zinc plated Hoist Motor: TEFC hoist motor Motor Brake: Electro-Magnetic Disc Style Motor Brake Trolley Motor: TEFC trolley motor Motorized Trolley: 20 FPM trolley speed Trolley Drop Stops: Yes - Includes Rubber Bumpers Headroom: Approx. 14.5" without chain container Chain Container: Yes Voltage: 460-3-60 power T.O.L. Relays: Yes - Hoist & Trolley Paddle Limit Switch: Yes Geared Upper/Lower Limit Switch: Yes Mainline Contactor: Yes Electrical Enclosure: NEMA 12 Hoist Duty: H-3 Beam Size: S24" x 90# standard I-beam (7-1/8" wide) Gearbox: Oil-bath Lubricated - Hoist Worm Gearbox Controls: 5 button NEMA 4 push button control pendant (E-Stop, Up/Down, Forward/Reverse) with 31' of drop Industrial Enamel Paint Power Cord: 35'-0" 12 gauge / 4 conductor power cord, no end connections