Renovation of a medical facility in Whitbourne, Newfoundland. Completed plans call for the renovation of a medical facility.

Closing Time: 2:00 PM (NT) **Please note that there has been 3 addendum issued for this project.** Question Acceptance Deadline: 2023/11/02 02:00:00 PM NDT Flat Roof Area: Remove existing roofing system components, projection and perimeter flashings, and old appurtenances down to existing wood roof deck in preparation for installation of a new modified bitumen roof system. New roof replacement work to be in accordance with Section 07 52 00. 1 Examine and Review Exposed Existing Wood Deck for Damage and Deterioration. Review With Project Manager and Repair Minor Damage (See Unit Price) as Required to Ensure a Smooth and Clean Surface. .2 Install New Wood Sheathing and New Wood Blocking as Required. .3 Install 6mm (0.25") Cover Board. .4 Install One Ply of Self-adhered Modified Bitumen Base Sheet Flashing. .5 Install One Ply of Torch Applied Granular Modified Bitumen Cap Sheet and Flashings. .6 Install New Prefinished Sheet Metal Flashings and Trim With Required Hook Strips. Shingle Roof Area: Remove Existing Roof Shingles, Underlay, Waterproofing Membranes, Flashing, and Wood Siding in Preparation for Installation of New Fibreglass Reinforced Shingle Roof. New Roof Replacement Work to Be in Accordance With Section 07 31 13.13. 1 Examine and Review Exposed Existing Wood Sheathing and Fascia for Damage and Deterioration. Review With Project Manager and Repair Minor Damage (See Unit Price) as Required to Ensure a Smooth and Clean Surface. .2 Install New Wood Sheathing and New Wood Blocking as Required. .3 Install Waterproof Membrane as Required. 4 Install Ice and Water Shield at Eave Lines and Valleys. .5 Install Shingle Underlayment. .6 Install Metal Flashings .7 Install New Fiberglass Reinforced Shingles .8 Install New Wood Siding Removed to Match Existing .9 Paint to Match Existing. General Requirements - Bid Deposit Required - Insurance Required Official bid documents must be obtained from www.merx.com and bid submissions must be done through the Merx platform.