Renovation of an educational facility in Omaha, Nebraska. Completed plans call for the renovation of a educational facility.

The work called for in these Bid Documents includes the removal of three existing boilers, LES model VW-135, and the installation in the same location of three new boilers meeting all of the requirements of the Contract Documents. All piping directly associated with the boilers will be demolished and new piping will be installed to make a true primary/secondary boiler arrangement. Hydronic accessories will be replaced, including the air separator and expansion tank. New pressure regulating valve and gas piping will be provided from the gas entry to each boiler. A section of the exterior wall will need to be removed and the surrounding area excavated to facilitate the installation of the new boilers Contractor will be responsible for removal and replacement of the exterior wall, the excavation, and the placement of new sod. The existing hot water pumps will remain in place. New VFD's will be provided for soft start on the existing pumps. (VFD installation to be broken out as a bid alternate for possible value engineering (VE)). The Contractor will furnish all labor, materials, equipment, tools and services necessary to provide a completed project as outlined in the Contract Documents. In general, all materials and equipment to be furnished by Contractor must be of good quality, new and unused, and shall be constructed and installed as required in the Contract Documents and of the types of equipment and materials as specified. Questions regarding the Bid Documents and the bid procedures and requirements must be submitted by email on or before FRIDAY, OCTOBER 27, 2023, at 5:00 p.m. CST.