Renovation of a military facility in Head of Jeddore, Nova Scotia. Completed plans call for the renovation of a military facility.

The goal of this project is to reduce the energy consumption and improve the operation of equipment through modifications to the operating schedules, controls sequences, addition of variable speed drives, and making repairs. A recommissioning investigation has been conducted by an engineering consultant where several recommissioning measures in a form of Excel spreadsheet master list of findings MLF was developed. Each building has its own MLF where the detailed scope of work corresponding to each of the recommissioning measure is provided. The supporting documents available for each building will be provided along the MLF, including but not limited to O&M manuals, previous TAB reports, available control drawings and/or current sequences of operation. The Proponent is responsible for implementing the optimized BAS programming schedules and controls sequences, adding any additional control points for newly controlled equipment and/or sensors and/or actuators, installing variable speed drives, and performing repairs, all of which is detailed in the MLF for each building. Proponent is to Provide the Following Bonding: Bonding is Not Required for Proposals That Have a Total Pre-tax Value Less Than $50,000. Bonding is Required for Proposals That Have a Total Pre-tax Value of $50,000 or Greater as Follows: 100% Performance Bonding. 100% Material & Labour Bonding. Question Acceptance Deadline: 2023/11/03 03:01:00 PM EDT Official bid documents must be obtained from www.merx.com and bid submissions must be done through the Merx platform.