Renovation of a water / sewer project in Eagan, Minnesota. Completed plans call for the renovation of a water / sewer project.

Project Category Code: Demolition/Building Removal/Hauling/Salvage, Erosion Control/Slope, Bank Stabilization, Traffic Control Devices (Signals, Signing, etc.), Electrical Equipment & Supplies, Directional Drilling, Lift Stations/Lift Station Equipment, Instrumentation & Control, Pumps or Pump stations, Fittings and Valves, Fittings and Valves, Sewer Inspection/Rehabilitation, Meter Vault Improvements, Erosion Control/Slope, Bank Stabilization, Piping, Well Drilling, Water Resources Infrastructure, Erosion Control - Temporary, Liquid Dust Control, Precast, Removal and Replacement of pipe Description: Work includes removal of the existing lift station controls, precast wet well lid, pump, piping, fittings, and all related appurtenances inside the wet well, removal of the existing lift station controls, precast wet well lid, pump, piping, fittings, and all related appurtenances inside the wet well, reuse the existing wet well and furnish new valve vault structure. Install new pump, piping, fittings, valves, and all appurtenances for the new station, furnish and install new controls and SCADA infrastructure. PROJECT LOCATION The project is located in the City of Eagan, MN, which is located in Dakota County. The project location is shown on the vicinity map in the design drawing set. PROJECT DESCRIPTION A. The work hereafter referred to requires the complete construction and start-up necessary for the facility with all required necessary equipment, generally described, but not limited to, in the following paragraphs: 1. Removal of existing lift station equipment and piping at the Lexington Storm Lift Station. The project includes the removal of the existing lift station controls, precast wet well lid, pump, piping, fittings, and all related appurtenances inside the wet well. 2. Reuse the existing wet well and furnish new valve vault structure. Install new pump, piping, fittings, valves, and all appurtenances for the new station. 3. Furnish and install new controls and SCADA infrastructure for the Lexington Storm Lift Station, as noted in the Contract Documents. 4. Perform various other miscellaneous and site improvements as detailed in the Contract Documents.