Site work and paving for a road / highway in Lumberton, North Carolina. Completed plans call for site work for a road / highway; and for paving for a road / highway.

The work covered by this provision consists of clipping high shoulders and reconstructing the earth shoulder in accordance with Standard Drawing No. 560.01 and 560.02 of the Roadway Standard Drawings with the following exceptions: the width will be shown on typical sections, or to the existing shoulder point, whichever is nearer, as long as the desired typical is achieved. Seeding and mulching shall be performed upon completion of shoulder grading when earth borrow is used. This work shall be performed immediately after the resurfacing operations are complete as directed by the Engineer. Contract Id DF00457 WBS: 2024CPT.06.09.10781.1 & 2024CPT.06.09.20781.1 County: Robeson Location: Various Goal MBE/WBE: 2.0% / 1.3% Job Type: Resurfacing, Milling, & Pavement Markings All prospective bidders shall be prequalified as a Bidder or PO Prime Contractor with the Department of Transportation prior to submitting a bid, in conformance with provision SP01 G01. Contractors who are not prequalified may obtain information and forms for prequalifying from the Contractual Services Management Section of the Contract Standards and Development Unit A Bid Bond is required in accordance with Article 102-10 of the 2018 NCDOT Standard Specifications. Contract Payment and Performance Bonds are required in accordance with Article 103-7 of the 2018 NCDOT Standard Specifications. The availability date for this project is December 1, 2023 The completion date for this project is June 1, 2025. Should you have questions, or need additional information, please contact Neil Butler, Division Proposals Engineer at jnbutler@ncdot.gov or by phone at 910-364-0603. NCDOT - Resurfacing, Milling and Pavement Markings