Site work and paving for a road / highway in Miramar, Florida. Completed plans call for site work for a road / highway; and for paving for a road / highway.

The City of Miramar Public Works Department is inviting qualified Asphalt Contractors to submit quotes to install speed humps on asphalt roads within the City of Miramar. Each hump shall span across 2 lanes of traffic which is 24ft wide. Quote shall include labor, materials, equipment, supervision, insurance, maintenance of traffic, and all incidentals to perform the Work completely. Three (3) humps shall be installed on Dolphin Dr. between Miramar Parkway & Miramar Blvd. Questions regarding this Request for Quotation (RFQ) shall be made in writing to the Procurement Specialist for this solicitation, Jason Chong via e-mail at: jdchong@miramarfl.gov. Questions are due by Tuesday, November 7 th , 2023 @ 5:00pm The work shall commence ONLY after the contractor has been notified by the Public Works Department but within five (5) business days after receipt of purchase order. The work shall be completed within Forty-Five (45) days from the date of commencement. The City reserves the right to reject any or all quotes, to waive any irregularities in the Solicitation process, and to award or not award a contract based on this solicitation, as deemed in the best interest of the City The Successful Contractor shall provide all equipment, labor, and materials necessary to install three (3) traffic calming speed humps. All speed humps shall be installed in two (2) lifts of S3 Asphalt, and tack coat must be applied prior to laying S3 asphalt. One foot (1') solid white thermoplastic arrows must be used to mark the speed humps, and three (3) reflective pavement markers (rpm) on each side facing traffic. All work must be done in strict compliance with the drawings and specifications illustrated below. The installation of six (6) Speed Hump Ahead signs must also be installed based on specifications W17-1 of Manual on Uniform Traffic Control Devices (MUTCD) to be placed within one hundred Feet (100') of approaching the speed hump along with 18 delineators to be placed, three (3) per side, per speed hump in accordance with the MUTCD Section 3F.01. The delineators must be level flexible, white colored with reflective sheeting, and stand at thirty-six inches (36"). They must be bolted and caulked per manufactures specifications.