This is a service / maintenance or supply contract in Paris, Illinois. Contact the soliciting agency for additional information.

This project requires 26% DBE participation, or if the contract goal is not met, documented evidence of good faith efforts. The Complexity Factor for this project is 0. The Consultant who is selected for this project and all Subconsultants the Prime Consultant will be using are scheduled to attend an initial meeting on February 8, 2024, at 10:00 AM at the Region Three/District Five Office in Paris. Phase III engineering services are required to provide construction inspection services for construction projects throughout District Five. All work for this project may be in either English or metric units. The Consultant will be required to furnish adequate qualified staff as approved by the District to assist in performing the required inspection, supervision, engineering layout, verification of contractor staking, maintain documentation, field material testing and other duties as assigned to allow the timely completion of projects in accordance with State Specifications. Projects requiring staffing may include, but not limited to, route and seal, pavement patching, pavement milling and resurfacing, bridge projects, traffic signals, landscaping, pavement markings, or urban rehabilitation projects. The Consultant will be required to assist in performing on-site inspections, layout including design changes, provide construction layout when not provided for in the contract plans, prepare records, maintain documentation, and provide general assistance as member of a field crew. Questions concerning this Bulletin should be directed to: E-mail: DOT.ConsultantServices@illinois.gov Or mailing address: Bureau of Design and Environment 2300 South Dirksen Parkway Attn: Consultant Unit Room 330 Springfield, IL 62764 The Prime firm must be prequalified in the Special Services (Construction Inspection) category to be considered for this project. Statements of Interest, including resumes of only the key people noted above, must be submitted electronically to the Central Bureau of Design and Environment through the Engineering Prequalification and Agreement System (EPAS). The method of contractor selection has not been determined at this time. IDOT - 22 - RFQ - Various Phase III Construction Inspection Projects, Various Routes, Various Counties, Region Three/District Five