This is a service / maintenance or supply contract in Los Angeles, California. Contact the soliciting agency for additional information.

The Department Reserves the Right to Reject Any and All Bids. Item No. Qty / Uom Description 1 10 Each Naics 333991 Matl Code 5398120 Ea Socket, Power, 1/2-inch Square-drive, Deep-length, 6-point, 1-1/4-inch. Industrial-black Finish. Flank-drive in Accordance With Aerospace Spec #as954-a and Federal Spec #ggg-w-641. A Flat-to-flat Contact Between Socket Surface and Sides of Fastener; a Radius in Each Corner; and an Additional Flat Behind the Radius is Required. Corner-contact and Point-contact is Unacceptable. Pneumatic-drive Impact Socket or Hand-socket is Unacceptable. "Proto" # J7340h 2 10 Each Naics 333991 Matl Code 5398121 Ea Socket, Power, 1/2-inch Square-drive, Deep-length, 6-point, 1-1/8-inch. Industrial-black Finish. Flank-drive in Accord With Aerospace Spec #as954-a and Federal Spec #ggg-w-641. A Flat-to-flat Contact Between Socket Surface and Sides of Fastener; a Radius in Each Corner; and an Additional Flat Behind the Radius is Required. Corner-contact and Point-contact is Unacceptable. Pneumatic-drive Impact Socket or Hand-socket is Unacceptable. "Proto" # J7336h 3 10 Each Naics 333991 Matl Code 5398122 Ea Socket, Power, 1/2-inch Square-drive, Deep-length, 6-point, 15/16-inch. Industrial-black Finish. Flank-drive in Accord With Aerospace Spec #as954-a and Federal Spec #ggg-w-641. A Flat-to-flat Contact Between Socket Surface and Sides of Fastener; a Radius in Each Corner; and an Additional Flat Behind the Radius is Required. Corner-contact and Point-contact is Unacceptable. Pneumatic-drive Impact Socket or Hand-socket is Unacceptable. "Proto" # J7330h 4 10 Each Naics 333991 Matl Code 5398128 Ea Socket, Power, 1/2-inch Square-drive, Deep-length, 6-point, 7/8-inch. Industrial-black Finish. Flank-drive in Accord With Aerospace Spec #as954-a and Federal Spec #ggg-w-641. A Flat-to-flat Contact Between Socket Surface and Sides of Fastener; a Radius in Each Corner; and an Additional Flat Behind the Radius is Required. Corner-contact and Point-contact is Unacceptable. Pneumatic-drive Impact Socket or Hand-socket is Unacceptable. "Proto" # J7432h 5 10 Each Naics 333991 Matl Code 5398136 Ea Socket, Power, 1/2-inch Square-drive, Standard-length, 6-point, 13/16-inch. Industrial-black Finish. Flank-drive in Accord With Aerospace Spec #as954-a and Federal Spec #ggg-w-641. A Flat-to-flat Contact Between Socket Surface and Sides of Fastener; a Radius in Each Corner; and an Additional Flat Behind the Radius is Required. Corner-contact and Point-contact is Unacceptable. Pneumatic-drive Impact Socket or Hand-socket is Unacceptable. "Proto" # J7426h 6 10 Each Naics 333991 Matl Code 5398137 Ea Socket, Power, 1/2-inch Square-drive, Standard-length, 6-point, 15/16-inch. Industrial-black Finish. Flank-drive in Accord With Aerospace Spec #as954-a and Federal Spec #ggg-w-641. A Flat-to-flat Contact Between Socket Surface and Sides of Fastener; a Radius in Each Corner; and an Additional Flat Behind the Radius is Required. Corner-contact and Point-contact is Unacceptable. Pneumatic-drive Impact Socket or Hand-socket is Unacceptable. "Proto" # J7430h 7 10 Each Naics 333991 Matl Code 5398140 Ea Socket, Power, 1/2-inch Square-drive, Standard-length, 6-point, 7/8-inch. Industrial-black Finish. Flank-drive in Accord With Aerospace Spec #as954-a and Federal Spec #ggg-w-641. A Flat-to-flat Contact Between Socket Surface and Sides of Fastener; a Radius in Each Corner; and an Additional Flat Behind the Radius is Required. Corner-contact and Point-contact is Unacceptable. Pneumatic-drive Impact Socket or Hand-socket is Unacceptable. "Write Tool" # 4828 8 10 Each Naics 333991 Matl Code 5398142 Ea Socket, Power, 1/2-inch Square-drive, Standard-length, 6-point, 1-1/8-inch. Industrial-black Finish. Flank-drive in Accord With Aerospace Spec #as954-a and Federal Spec #ggg-w-641. A Flat-to-flat Contact Between Socket Surface and Sides of Fastener; a Radius in Each Corner; and an Additional Flat Behind the Radius is Required. Corner-contact and Point-contact is Unacceptable. Pneumatic-drive Impact Socket or Hand-socket is Unacceptable. "Proto" # J7436h 9 16 Each Naics 423610 Matl Code 3511302 Ea Light Fixture, Infrared Light, Dual Retro Fit Fixture, Dialight Vigilant L810 Rto Series Obstruction Light. The L810 Red Obstruction Light Fixture Shall Utilize Light Emitting Diod (Led) Technology and Be Certified to Meet Most Recent Federal Aviation Advisory Circular 150/5345, the Obstruction Light Must Be Designed to Withstand the Dynamic Conditions Expeienced in the Most Severe Environments and Must at a Minimum Show Proof That the Obsrtuction Light Operates Properly in Temperatures Ranging From -40 to + 55c Celsius, Direct Sunlight, Wind Blown Rain and Wind in Excess of 150 Mph, High Humidity Levels and Salt Fog Exposure. Rto Double Faa Acir. A Request for Addenda, Interpretation, or Clarification Shall Be Received in Ersp Through Questions and Answers by the Buyer in Time to Permit a Written Response No Later Than 48 Hours Prior to Bid Closing. Any Interpretation of or Change in the Document Will Be Made Only by Addendum Issued to Each Person to Whom Specifications Have Been Issued and Shall Become a Part of Any Contract Awarded.