Renovation of an educational facility in Ogden, Utah. Completed plans call for the renovation of a educational facility.

Replace existing VAV system in the building with water sourced VRF system. Minor modifications to the domestic water feed into the building and replacement of the existing water heaters with heat pump type units. Construction Cost Estimate: $1,200,000.00 Only Firms Pre-qualified During Stage I of the RFS Are Allowed to Bid on This Project Project Description: Replace existing VAV system in the building with water sourced VRF system. Minor modifications to the domestic water feed into the building and replacement of the existing water heaters with heat pump type units. All clarifications from DFCM will be in writing and issued as an addendum to the RFS. Addenda will be posted on the U3P website Furnish all labor, materials, and equipment necessary for the completion of the mechanical and plumbing scope of work. 2. Furnish and install all motors specified in this Division and be responsible for the proper operation of electrical powered equipment furnished by this Division. 3. Furnish exact location of electrical connections and information on motor controls to Division 26. 4. Mechanical Contractor shall obtain the services of independent Test and Balance Agency. 5. Placing the air conditioning, heating, ventilating, and exhaust systems into full operation and continuing their operation during each working day of testing and balancing. 6. Making changes in pulleys, belts, and dampers, or adding dampers, as required for the correct balance as recommended by Balancing Contractor at no additional cost to Owner. 7. Air balance, final adjustment and test run. 8. The satisfactory performance of the completed systems is a requirement of this specification. This contractor shall include the time, materials, and assistance needed to assist the owner's commissioning agent and commissioning requirements. This includes observations, functional performance testing, startup documentation, training, final verification, etc. Coordinate with Division 1 Commissioning Requirements. 9. Provide a minimum of 16 hours commissioning assistance for functional performance testing.