Renovation of a residential development in Milwaukee, Wisconsin. Completed plans call for the renovation of a residential development.

General Construction Services, General Maintenance & Repairs, Roofing Complete/sign applicable pages with and return with bid) If you have any Section 3 questions, please contact Konita Jude at 414-286- 2940 or Kpjude@hacm.org Please sign and fax to: 414-286-5502 by or email sshaw@hacm.org by Friday, November 17th, 2023 at 12:00 P.M. Furnish labor, material and service necessary to remove/replace the garage roof at 2482 West Vliet Street, Milwaukee, WI 53205, as per the following scope: Note: Contractors shall perform work in accordance with all lead and asbestos removing procedures including, but not limited to, the containment and removal of materials on the ground. Contractor shall provide a dumpster for the containment of debris at commencement of project. Bagging is not acceptable. Contractor will be responsible for any damages done to lawn, or to neighbor's property. Site should be cleaned up DAILY. Storage of materials on site is not allowed. Contractor is responsible for providing a power source. Overall job is to be professional and done in a workmanlike manner. You are strongly encouraged to attend a walk-thru with the Manager and/or Maintenance to ensure the responsiveness of your bid and meet the scope of work. If you desire to visit the property, contact the Housing Manager, Kelly Duncan, 414-286-5797, or Kelly.Duncan@hacm.org to schedule an appointment. ROOF 1. Safeguard property from falling objects coming from the roof. 2. Remove existing shingles, drip edge, and any damaged or rotted roof sheathing and/or deck board 3. on garage. Contractor to replace any rotted roof sheathing, and properly prepare surface for roofing material. 3. Contractor to replace any rotted roof sheathing, and properly prepare surface for roofing material. Contractor also to address/repair fascia at NW corner behind gutter prior to re-roofing. 4. Dispose of any cable lines, antenna and satellite dishes, etc. 5. Install new drip edge on eaves. 6. Install engineered roof barrier/membrane. TIGER PAW or equivalent compatible with chosen roofing system. 7. Install starter strips at base of roof and roof eaves. 8. Use manufacturer supplied cap shingles of matching color to dimensional shingles for ridge caps. Any exposed nail heads to be covered with roof caulk or tar. 9. Install 30-year dimensional shingles Landmark CertainTeed, or approved equivalent. PROJECT MANAGER MUST APPROVE THE COLOR BEFORE INSTALLATION. Contractor shall use a minimum of 4 nails per shingle; nails to be sufficient in length to secure shingle, and install at a 90 degree angle to surface. Installation to follow manufacturers guidelines. Color to match house roof. 10. Provide minimum 30-year manufacturer's warranty on installed roofing system. Work shall commence within 10 business days of contract award and completed within 2 weeks of start date (weather permitting). Management Office must be notified, so tenants can be notified. Contractor will be held liable for any damage caused to the building and ancillary structure, and/or injury to the occupants resulting from the execution of the work or from not exercising proper precautionary protective measures. Any cost of repair/replacement resulting from damages shall be at the contractor's expense.