Privately Funded
Bidding Soon
Documents Available
Publicly Funded
Addenda Available
Post-Bid
Saving Project...
Renovation of an educational facility in Grand Junction, Colorado. Working plans call for the renovation of a educational facility.
Estimated Construction Cost: $1,378,677 Reference Number 0000335781 Colorado Mesa University (CMU) is seeking bids from qualified mechanical, electrical and plumbing contractors to remove the existing HVAC system in the Fine Arts building and replace with a new heat pump system. The Fine Arts building was constructed over 19 years ago and has been occupied for 12-17 hours each day ever since. Because of its age, many building components are either at or very near the end of their useful life. One such building system includes the heating, ventilating, and air conditioning system, which have reached the end of their useful life and must be replaced. The existing system includes 2 hydronic boilers, pumps, and motors, a large roof top unit (RTU's) and hot water re-heat V.A.V.'s in the interior spaces, and a large gas water heater that provides domestic hot water for the entire building. CMU installed geo exchange piping adjacent to the building during the renovation / expansion of Dominguez Hall in 2007. The existing piping provides the geo exchange resource to Dominguez Hall and will be extended to serve the Fine Arts building with this project. Removing and replacing heat pumps will require existing ceiling grid, speakers, fire alarm strobes, annunciators, and fire suppression systems that interfere with removal and re-installation to be removed/disconnected, stored and re-installed. The contractor chosen to perform the work will have access to the building beginning on Saturday, May 18, 2024, and must complete the work on or before Monday, August 5, 2024. Liquidated damages in an amount equal to $1,500/day will be assessed for each day of delayed completion after August 5th,2024. Job Location Colorado Mesa University Main Campus 1100 North Avenue Grand Junction, Colorado United States 81501 Question Deadline 12/04/2023 at 1:00 PM MT -- Email questions are required to be submitted to: Suzanne Ellinwood, Director of Procurement & Risk Management at sellinwo@coloradomesa.edu Bid Intent Deadline 12/08/2023 01:00 PM EST Bonding Requirements - Bid Bond 5 % The scope of work identified within the Construction Documents includes the following: o Connection to existing geothermal piping on site and route to the South side of Fine Arts. o Removal of the existing cast iron boilers. o Provide and install (2) new 60-ton 6-pipe heat recovery chillers. o Route new geothermal supply and return piping into the South side of Fine Arts, route through the building, to the existing mechanical room location on the North side of the building. o Provide and install new 100-ton chilled water coil in the existing packaged Trane Intellipak rooftop unit. o Provide and install new heating and chilled water plate and frame heat exchangers in the ceiling space of the 3rd Floor. o Provide and install new heating and chilled water buffer tanks in the existing mechanical room. o Provide and install new heating and chilled water piping. Coil side of plate and frame heat exchangers shall be 30% propylene glycol. o Provide and install new heating, chilled, and geothermal water pumps. o New equipment to have Trane web-based DDC controls to integrate into the existing campus building automation system. o In the 1st Floor mechanical room upgrade the existing Trane UPCM controller to a new Trane Symbio 500 BACnet unit controller. Rewire existing points to the new controller. o In the 3rd Floor utility room upgrade the existing Trane BCU to a new Tracer SC+ and Legacy Communication Bridge combination panel. o In the 3rd Floor utility room upgrade the existing Trane UPCM controller to a new Trane Symbio 500 BACnet unit controller. Rewire existing points to the new controller. o Removal of the existing rooftop unit DX system including DX coil, compressors, condenser fans, and DX control accessories. o Electrical work involves powering the new mechanical equipment.
Final Planning
Educational
$1,378,677.00
Public - State/Provincial
Renovation
Trades Specified
Division 00 - Lorem Ipsum
Find More Local Projects
Within 75 Miles of This Project
One Low Price
- One license and one market
- Details and key contacts on all bidding projects
- Organize your pipeline with a digital bid board
- Automatically match opportunities to your profile
- Saved searches deliver daily project leads to your email inbox
Market Pricing Around
- All Starter Product functionality
- Access to all documents (plans, specifications, and addenda)
- Access to planning projects
- Access to contact information
- Ability to Export
You’ve Reached the Free View Limit
Want to see more project and bidder data in your market? Check out our product options and see what works best for you and your business.
Come back in [[refresh_days]] to get [[project_count]] more free projects.
December 15, 2023
May 18, 2024
1100 North Ave, Grand Junction, CO
Related To This Project
Grand Junction, CO
Bid Date: Feb 12 2020
Grand Junction, CO
Bid Date: Jan 24 2024
Grand Junction, CO
Bid Date: May 02 2024
Grand Junction, CO
--
Grand Junction, CO
--
Grand Junction, CO
Bid Date: Dec 22 2023
Grand Junction, CO
Bid Date: Jan 31 2024
Grand Junction, CO
--
Grand Junction, CO
Bid Date: Dec 15 2023
Grand Junction, CO
Bid Date: Dec 05 2023
Grand Junction, CO
Bid Date: Nov 17 2023
Grand Junction, CO
Bid Date: Dec 06 2023
Grand Junction, CO
Bid Date: Nov 06 2023
Grand Junction, CO
Bid Date: Nov 15 2023
Grand Junction, CO
Bid Date: Oct 23 2023
Recently Viewed
--
--
--
--
--
--
--
--
--
--
The data you need to build the relationships you want. Try it free.
Sign up now to get free company and project data. No payment required.
Get the right
data with Project Intelligence
Project Shared
with
example@example.com
Choose what you would like to do.
Seen enough? Want to see more? Subscribe on your own or talk to one of our sales reps.
What is your business type?
We have a wide variety of products that are purpose built for certain business types.