Renovation of an educational facility in Mississauga, Ontario. Completed plans call for the renovation of a educational facility.

Air Handling Unit Upgrades at Meadowvale SS and Streetsville SS. The estimated contract value is $1,800,000 Meadowvale SS and $1,200,000 Streetsville SS. Documents can be obtained at https://peelsb.bonfirehub.ca/opportunities/73540 Question Deadline 12/04/2023 at 4:00 PM ET The scope of work for this project will include cleaning of all HVAC ductwork system, including supply and exhaust/return air ductwork, dampers and accessories. (location of major equipment and terminal equipment is shown on the mechanical drawings). The HVAC ductwork system includes any interior surface of the facility's air distribution system for conditioned spaces and/or occupied zones. This includes all heating, ventilating and air conditioning systems from the points where the air enters the system to the points where the air is discharged from the system. The supply air ducts, supply air diffusers and grilles, return air ductwork and grilles, elbow turning vanes, are all considered part of the HVAC ductwork system. Remove all electric control devices, sensors, operators and controllers serving the existing air handling system (refer to drawings for scope). Work includes removal of all redundant pneumatic tubing, control panels, and wiring. Cap air lines such to allow the rest of the pneumatic controls to operate without leaks; do not contaminate pneumatic tubing with debris or oil. Demolition of the existing controls is part of the control contractor scope of work. The control contractor to check and identify all pneumatic tubing prior to starting the demolition work. Supply and install the new BAS components (sensors, actuators, operators, wiring, relays, controllers, panels, etc) required to make the new air handling systems operate in accordance with the sequences indicated on the drawings. Remove any redundant timers and associated wiring and devices controlling the demolished equipment. Update existing programming as required to match the sequence of operation indicated on the drawings; c/w graphical displays on the Board main server to match the new equipment layout and configuration. Award value is undisclosed.