Site work and paving for a mixed-use development in Lyons, Illinois. Completed plans call for site work for a road / highway; for paving for a road / highway; sidewalk / parking lot; and sidewalk / parking lot.

This work shall consist of the removal of existing hot-mix asphalt pavement surface at the locations shown on the Plans, or as directed by the Engineer, to a depth and width as detailed on the Plans. All work shall be done in accordance with Section 440 of the Standard Specifications. Prior to any grinding, the Engineer will take note of where the existing pavement may need to be patched. The grinding operation shall be done after any curb removal and replacement is performed. A full depth cut of the grinding machine of the approximate depth indicated on the Plans shall begin at the edge of pavement and progress towards the centerline. The Contractor will make as many passes as necessary to remove the asphalt thickness as required. The Contractor shall be allowed to use only the cold milling method to remove the existing hot-mix asphalt surface as outlined in Article 440.04 of the Standard Specifications. Care shall be taken not to cause undue damage to the pavement intended to be left in place or any existing curb and gutter. This work shall also include any saw cutting at the limits of the milling, the removal by hand methods of any materials that the milling machine is unable to otherwise remove, and the construction of temporary hot-mix asphalt ramps, as detailed on the Plans. Upon completion, all areas where the hot-mix asphalt surface was removed shall be cleaned to the satisfaction of the Engineer and primed prior to the placement of subsequent hot-mix asphalt surfacing materials. Milled pavements are required to be resurfaced within ten (10) calendar days. The proposed work is officially known as consists of hot-mix asphalt surface removal and resurfacing; combination concrete curb & gutter; driveway pavement removal and replacement; electric cable in unit duct; landscaping; and all appurtenant construction Site Directions: See Specs & Plans