Site work and paving for a road / highway in Houston, Texas. Completed plans call for site work for a road / highway; and for paving for a road / highway.

Paving Improvements for Paloma Section 2 The Owner reserves the right to reject any or all Bids and to waive all defects and irregularities in bidding or bidding process except the time for submitting a Bid. Question Deadline 01/19/2024 Name and Location of Project. Work covered by these Technical Specifications is entitled "PAVING IMPROVEMENTS FOR PALOMA SECTION 2 for Century Communities, Inc. on behalf of Proposed Harris County Municipal Utility District No. 586, Harris County, Texas." 2. Description of Work. a. Under this Contract, Contractor shall furnish all materials, appliances, tools, equipment, transportation, services, and all labor and superintendence necessary for the construction of the Work as described in these Technical Specifications and as shown on the Plans. The completed installation shall not lack any part that can be reasonably implied as necessary to its proper functioning or any subsidiary item that is customarily furnished, and Contractor shall deliver the installation to Owner in operating condition. b. The Work, in general, under this Contract includes the purchase, installation, and construction of all structures, equipment, and materials, including appurtenances, as indicated on the Plans. Major items of construction and services required are designated as follows: (1) Install and adjust waterlines, valves, valve boxes, flushing valves, fittings, and appurtenances; (2) Construct and adjust sanitary sewer, manholes and appurtenances; (3) Repair existing pavement affected; (4) Furnish and install all subsidiary items as necessary to complete the project; (5) Perform testing as specified on installed lines; and (6) Clean-up project area upon completion. 3. Technical Specifications. a. Technical Specifications are of the abbreviated, simplified or streamlined type and include incomplete sentences. The omission of words or phrases such as "Contractor shall," "in conformity therewith," "shall be," "as noted on Plans," "according to Plans," "a," "an," "the," and "all," are intentional. Omitted words or phrases shall be supplied by inference in same manner as they are when a "note" occurs on Plans. b. The Technical Specifications are interpreted to require that Contractor shall provide all items, articles, materials, operation or methods listed, mentioned, or scheduled either on Plans or specified herein, or both, including all labor, materials, equipment, and incidentals necessary and required for their completion. c. Whenever the words "designated," "submitted," "observed," or similar words or phrases are used, it shall be assumed that the word "Engineer" follows the verb as the object of the clause, such as "observed by Engineer." d. All references to standard Technical Specifications or manufacturer's installation directions shall mean the latest edition thereof on the date Bids are due unless specifically noted otherwise.